Smart Comfort DELTA Quick Start Manual & Operating Instructions

Remove your shoes and sit into the chair. You can press down with your feet to extend the footrest length. It is recommended to use the massage chair without wearing jewellery or watches. Press the power button on the remote control, and allow the chair 20-30 seconds to calibrate for your body size. Place your arms inside the arm rests. The chair will automatically enter an automatic massage mode if no buttons are pressed. You can enjoy this mode as it is, or read these operating instructions to learn about more advanced operation.

on & of . Wait 20-30 seconds for the chair to calibrate size and position, then select a mode on the remote control. The chair will automatically enter Comfort auto mode if no options are selected. • Adjust shoulder up & down arrows adjust how far up the shoulders the rollers will travel during shoulder focused movements. BASIC CONTROLS

of the chair: • Zero button moves the chair into zero gravity horizontal position • Up & down arrows change the footrest height • Left & right arrows adjust the backrest recline position • Foot roller button switches the foot roller between 3 speeds (or of .) CHAIR POSITION CONTROLS

following automatic massage modes: • Ache relieve focuses primarily on the neck and shoulders • Comfort is a gentle mode that targets the whole body • Upper body focuses on the upper body • Relax focuses mainly on lower back, legs & feet • Demo is a full-body massage, using functions from all modes • Lower body focuses on the lower body AUTOMATIC MODE CONTROLS

ADJUSTMENT CONTROLS Used for controlling the following functions during manual operation: • Mode changes massage techniques between the following, or of : • Speed adjusts the speed of the massage rollers during manual modes • Width adjusts the width between rollers during shiatsu, tapping or knocking modes kneading shiatsu tapping kneading + tapping knocking all-guides com

ADJUSTMENT CONTROLS H0 fi xed position back massage H1 short area back massage H2 entire back massage H3 upper back massage H4 lower back massage • Back stretch toggles back massage modes between: • The arrows either side of back stretch can be held down to adjust the position of rollers during H0 and H1 back modes. • Air Mode toggles airbag function between: arms, feet, arms + feet or of * • Air Power adjusts the intensity of pressure from the airbags* • Back Heat turns the infrared back heating on/of * *can also be adjusted during automatic modes. MEMORY FUNCTION To save the current massage settings, press the power button to turn the chair of , and press & hold M1 or M2 for 3 seconds while the screen is displaying “Memory.” When the chair is on, press and hold M1 or M2 for 3 seconds to load the saved massage settings. (M1 and M2 share the same button as Upper Body and Lower Body.)

Please stop immediately and consult your doctor if you feel unwell when using this machine. Not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless supervised. Do not use if you are pregnant, unwell, or have a pre-existing medical condition. Do not sit on the back, armrest, or the leg rest as it may result in damage or injury. Do not press or put your hands into the cloth cover of the massage hands. DELTA MASSAGE CHAIR Keep at least 50mm of clear space between the chair backrest and nearby walls or furniture to ensure there is no contact with any items when chair is fully reclined.