SkyLink ATOMS Series Owner's Manual

Watch Quick Setup Videos at www.skylinkhome.com/videos or scan • Please read this manual and the enclosed safety materials carefully! • Safety Infrared Sensor MUST BE INSTALLED and aligned properly. • Periodic checks of the openers are required to ensure safe operation. • Save this manual for future reference. • This Equipment meets or exceeds all Federal, State and UL325 Safety requirements. • For more information, updates and useful links, please visit our website http://www.skylinkhome.com IMPORTANT: DO NOT RETURN TO THE STORE, CONTACT OUR CUSTOMER SERVICE 1-800-304-1187 M-F 9am-5pm Online Chat: www.skylinkhome.com [email protected] For residential use only ™

Congratulations on your purchase of Skylink Garage Door Opener. This documentation provided with your opener has been carefully designed and organized to make the assembly, operation and continued maintenance of your product as easy and safe as possible, provided it is installed, operated, maintained and tested in strict accordance with the instructions and warning contained in this manual. Read and follow all guidelines and operating instructions before the first use of this product. Store the manual in a safe, easily accessible location. This type of warning symbol is used to indicate possible mechanical or electrical hazards that may cause serious injuries or death. This type of warning symbol is used to indicate the possibility of damage to the garage door or opener. WARNING CAUTION Safety Symbol Overview WARNING To prevent possible SEVERE INJURY OR DEATH: • DO NOT install opener on an unbalanced door. Call a trained door systems technician if garage door binds, sticks or unbalanced. • Disable all locks and remove all ropes connected to the garage door before installing the garage door opener. • DO NOT connect the opener to any source of power until instructed to do so. • Door Control must be installed within sight of door, at a minimum height of 5ft and away from all moving parts of the door. • DO NOT try to remove, repair or adjust springs or anything to which door spring parts are fastened. • Repair and adjustments must be made by a trained door system technician. • Turn off power before removing opener cover. • Opener must be properly grounded. • Auto-Close Timer and Orbit Home Smartphone app cannot be used with one-piece doors. These features can only be used with sectional doors. 1 Introduction ············································· Pre-Installation Checklist ················· Parts And Accessories ······················· Hardware ··················································· Important Instructions ····················· Assemble The Rail ······························· Installation ··············································· Install The Header Bracket ························ Hang The Garage Door Opener ················· Install The Door Bracket ···························· Install The Door Control ····························· Install The Safety Beam Sensor··················· Programming ········································ Operation ·················································· Open / Close Garage Door Manually ·········· Remote And Keypad ································· Deluxe Wall Console ································· Erase The Memory ···································· Maintenance ··········································· Wi-Fi Connectivity ······························· Troubleshooting - Error Code ········ Troubleshooting ···································· Warranty ···················································· CONTENTS 1 2 3 5 6 7 11 11 13 14 17 19 22 25 31 33 34 35 37 26 27 30 31 INTRODUCTION

assembling the opener: • Identify the door type: sectional door or one-piece jamb door. • Ensure your garage door is balanced and is not sticking or binding. • Here is how wo check the door balance: • From outside the garage, slowly open the door all the way and close it all the way- DOOR SHOULD NOT BIND OR RUB. • Raise the door halfway up – DOOR SHOULD STAY IN PLACE, SUPPORTED ENTIRELY BY ITS SPRING. Sectional Door One-piece Door IMPORTANT • If the garage door fails either of these tests, have a qualified garage door professional adjust or repair the door. • If the garage door is lightweight (made with frame and skin, not solid), it must be braced or reinforced before installing the opener (including the door frame). Check with a qualified service professional for a door reinforcement kit. • If you do not have an access door in addition to the garage door, you should install an emergency key release kit. • If your door is more than 7’ (2.1 m) high, you will need a rail extension kit (sold separately). • With the garage door closed, check alignment of door and garage floor. The gap, if any, should be no more than 1/4” (6 mm). If the gap is larger than this, repair floor or door before installing opener. 2 PRE-INSTALLATION CHECKLIST

adjustment is complete. Instructions for the accessories will be attached to the accessory and are not included in this manual. The images throughout this manual are for reference only and your product may look different. Parts J12. Door Control* J13. Safety Beam Sensors Kit J14. Keychain Remote* J15. Keyless Entry* J16. Wi-Fi Adapter* Accessories K1. Chain/Belt Assembly* K2. Turnbuckle Connector K3. Turnbuckle K4. Holding Hook Parts J1. Rail Sections J2. Idler Pulley J3. Trolley Assembly J4. Sprocket J5. Rail Brackets J6. Sprocket Cover J7. Door/Head Bracket J8. Door/Head Bracket J9. Hanging Brackets J10. Straight Arm J11. Curved Arm Note that accessories will depend on the model you purchased. If anything is missing, carefully check the packing material. NOTE* J1 J2 J3 J4 J5 J6 J9 J7 J8 J11 J12 J10 J13 J14 J15 K4 J16 3 PARTS AND ACCESSORIES