Siemens 7XV5655-0BA00 Application Instructions

7XV5655-0BA00 Manual C53000-G1176-C174-3 Application Instructions Serial Hub Ethernet hub for transmission of serial data or protocols from devices with an RS232/RS485/FO interface via Ethernet ...

C53000-G1176-C174-3 CONTENTS GENERAL INFORMATION..................................................................................................................................3 APPLICATION............................................................................................................................................ ...

C53000-G1176-C174-3 General Information This manual contains the information that is necessary for proper and safe operation of the products described. This manual is intended for technically qualified personnel having received special training in, or having special knowledge of protection, measurement and control engineering, he ...

C53000-G1176-C174-3 Statement of Conformity This product complies with the directive of the Council of the European Communities on the approximation of the laws of the member states relating to electromagnetic compatibility (EMC Council Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage li ...

C53000-G1176-C174-3 Instructions and Warnings The information and warnings in this manual must be observed for your safety and to ensure an appropriate service life of the device. The following terms and definitions are used: DANGER means that death, severe bodily injury or substantial material damage will occur if the appropriat ...

C53000-G1176-C174-3 Warning! Hazardous voltages are present in this electrical equipment during operation. Severe personal injury or property damage can result if the device is not handled properly. Only qualified personnel should work on or around this equipment. The personnel must be thoroughly familiar with all warnings and ma ...

C53000-G1176-C174-3 Scope of Supply • Serial Hub for DIN rail mounting • Gender changer, 9-way, male-male • CD with manual and configuration tool • Installation Instructions Unpacking and Repacking The devices are packed at the factory to meet the requirements of IEC 60255–21. Unpacking and repacking must be performed w ...

C53000-G1176-C174-3 Application General scope of application The Serial Hub is designed for operation in industrial zones and substations. The Serial Hub enables devices with serial interfaces (RS232, RS485, or FO) to convert data to the UDP protocol and to transmit and receive it via a TCP/IP network. This allows devices without ...

C53000-G1176-C174-3 Application in Substations Using a 7XV5655-0BA00 Serial Hub with a fixed IP address, one or more SIPROTEC protection units can exchange serial data via an Ethernet network. On the operating PC, a configuration tool is used to link virtual COM port with the IP address of a Serial Hub. Using DIGSI 4 it is then p ...

C53000-G1176-C174-3 Features ƒ Protocol detection according to EN 60870-5-101/103 and DIGSI protocol (similar to IEC60870-5-103), UDP protocol with error detection and correction ƒ A 10-Mbit Ethernet interface (10BaseT) to the 10/100 Mbit network. ƒ RS232/RS485 (switchable port) or FO interface for data transfer. ƒ Serial ba ...