Siemens 3VF Series Communications Manual

3WN6 Circuit-Breakers Version 1.0 (05/98)  Copyright Siemens AG 1998. All rights reserved. 53 RELEASE N and P H and J/K D and E/F PLC input data from 3WN6 (cyclic) OCTET 9 Ready to close BIT 15 X X X Load shedding BIT 14 X X X Reserved BIT 13 X X X Phase number for main actual value BIT 12 X X X Phase number for main actual value BIT 11 X X X Group error signal 51) BIT 10 X X X Group warning signal 49) BIT 9 X X X Group fault signal 49) BIT 8 X X X OCTET 10 BIT 7 "Tripped" signal not acknowledged52) BIT 6 X X X Electrical closing lockout BIT 5 X X X BI ...

3WN6 Circuit-Breakers Version 1.0 (05/98)  Copyright Siemens AG 1998. All rights reserved. 63 3.5.3 STEP 5 program The function and data blocks required for utilizing the full scope of communication are supplied on diskette. An example illustrates how these blocks are integrated in an existing S5 program and how they are adapted in line with local conditions. Attention: The following versions are required if the program is to function properly: • 3WN6 interface module: old hardware version (PROFIBUS outgoing circuit on base) 2, new hardware version (PROFIBUS o ...

3WN6 Circuit-Breakers Version 1.0 (05/98)  Copyright Siemens AG 1998. All rights reserved. 59 3.5 Description of software block required for utilizing communication functions with SIMATIC S5 and S7 3.5.1 CPU and DP master types IM308C CP5431 itself CP342-5DP CP443-5DP IM467 941 ¨ ¨ 942 ¨ ¨ 943 ü ü 944 ü ü 945 ü ü 922 ¨ ¨ 928 ¨ ¨ 928B ü ü 946/947 ü ü 948 ¨ ¨ 313 ¨ 314 ¨ 315 ¨ 315-2DP ¨ ¨ 412 ¨ ¨ 413 ¨ ¨ 413-2DP ¨ ¨ ¨ 414 ¨ ¨ 414-2DP ¨ ¨ ¨ 416 ¨ ¨ 416-2DP ¨ ¨ ¨ ü Tested ¨ Planned, but assessment not yet finalized. Not pl ...

3WN6 Circuit-Breakers  Copyright Siemens AG 1998. All rights reserved. Version1.0 (05/98) 28 Software: - 3.5" diskette with type/GSD file for the software connection of 3WN6 to PROFIBUS-DP (bus configuration). This diskette (no. 2b) is supplied with the interface. Step 6, page 34 outlines which file is to be used for which master. - Bus master software for communication control. In order to communicate with the SIMATIC S5/S7 as bus master, a standard software block (no. 5) is required (see page 59 for a description of this module): Order number: 3RK1800-0AA00- ...

3WN6 Circuit-Breakers Version 1.0 (05/98)  Copyright Siemens AG 1998. All rights reserved. 71 3.5.3.6 Extract from program listing of supplied example 3.5.3.6.1 DB80 DB80 C:BS3WN6ST.S5D LAE=261 /514 3WN6 ASSIGNMENT TO MESSAGE GROUP 0 Sheet 1 0: KF = +00000; 1: KY = 000,000; 2: KF = +00500; 0:01 TEST UNIT+DELIVERY DATE 3: KY = 001,000; 4: KF = +00500; 0:02 IDENTIFIER NUMBER 5: KY = 002,000; ...

3WN6 Circuit-Breakers  Copyright Siemens AG 1998. All rights reserved. Version1.0 (05/98) 46 T-Nr. RELEASE N and P H and J/K D and E/F Message address 1:8 Fault messages 32) 748, 1, 0 (Only with communication module with measurement functions (Z=F05)) The input of octet strings OS1 to OS4 is not required for the message address in this case. OS1:7 Underfrequency OS1:6 X Overfrequency OS1:5 X Reversal of direction of power flow OS1:4 X Overvoltage OS1:3 X Voltage phase imbalance OS1:2 X Undervoltage OS1:1 X Current phase imbalance (Fine settings 5 - 50 %) OS1:0 ...

3VF Circuit-Breakers  Copyright Siemens AG 1998. All rights reserved. Version1.0 (05/98) 16 Legend for wiring diagrams a) and b) 1.) SIMOCODE-DP input: not connected (NC) 2.) SIMOCODE-DP input for indicating circuit-breaker state "OFF" 3.) SIMOCODE-DP input for indicating circuit-breaker state "ON" 4.) SIMOCODE-DP input for indicating circuit-breaker state "Tripped" 5.) SIMOCODE-DP output: internal 24 V voltage supply for inputs 6.) SIMOCODE-DP input for 230 V AC operating voltage for motorized operating mechanism. Note: If rated voltages < 230 V are required ...