PerkinElmer LAMBDA 265 Operation & User’s Manual

3. Press the cassette down to lock the right side snap lever on the locking bar. 4. Connect to the flangeless fittings to the inlet and outlet tubes for the flow cell. 5. Connect one connector of the inlet tube to the port of the flow cell with the arrow mark and the other connector of the inlet tube to the upper port inside of the front plate for Auto Sipper Accessory, and connect the outlet tube to the outlet port of the flow cell and to the lower port inside of the front plate for Auto Sipper accessory. ...

Dimensions and Specifications Dimensions of AutoSampler Physical Characteristic Specification ASX-260 ASX-520 Power 100-240 VAC, 47/63 Hz Dimensions (mm) 330 (W) x 508 (D) x 610 (H) 520 (W) x 482 (D) x 610 (H) Weight (kg) 8.4 10.5 Tray 2 racks capacity 4 racks capacity Physical Characteristic Specification ASX-280 ASX-560 Power 100-240 VAC, 47/63 Hz Dimensions (mm) 355 (W) x 550 (D) x 620 (H) 580 (W) x 550 (D) x 620 (H) Weight (kg) 8.1 11.7 Tray 2 racks capacity 4 racks capacity Specifications of Peristaltic Pump ...

Installation 1. Place the Lambda 265/365/465 autosampler (ASX-260/280 or 520/560) and peristaltic pump in a location that is compatible with the required environmental conditions for the operation. 2. Connect the communication cable and the power cord to each system and PC. 3. When the autosampler is connected via USB, the customer needs to install in the PC the USB driver enclosed in the Install CD. 4. In case of peristaltic pump you should download the USB driver on the IDEX website. 5. website: https://www.idex-hs.com/s ...

7. Select OK after checking the changed parameter values. 8. Launch the software. 9. If the instrument fails to communicate with the PC, change the COM Port Number referring to the following procedures. 10. Open the Advanced Setting for COMx window, following the procedure of Setting USB Serial Ports on page 36. 11. Select on the COM Port number list to expand it and change the COM port number to another one which is not in use from COM 1 to COM 10. ...

Features The ASX 260/280 and ASX-520/560 autosamplers are designed to be study, reliable and easy to use. They provide automated sample introduction that enables you to perform other tasks while the Auto Sampler runs. The ASX 260/280 and ASX-520/560 automatically introduces up to 180 and 360 samples each when fully loaded. It contains a microprocessor that allows sequential or random sampling, providing flexibility. The components of autosampler are made of corrosion-resistant stainless steel alloys or anodized alu ...