Percussion Play CAVATINA Installation Instructions

base of the instrument with the M8 Nyloc Nuts and 2 part security caps. (1.1) (See Assembly Guide) Wall Fixed Ground Surface KS1,2 KS1 – 700mm KS2 – 850mm Installation Instructions 2. Attach Wall Fixing posts to legs(1.2) (See Ground Fix Post Installation Sheet) (1.1) Instrument Components: 6. Attach the 1 pair of beater to the saddle strap on the leg. (1.3) Wall Fix Components: (1.3) 14 Kg Pair Small Red Beaters X1 Cavatina Page 1 of 2 Weight of heaviest part 15kg (Cavatina) BS EN 1176 Metric Conversion: 700mm/ 28” 850mm/ 33” 1.5m/ 59” M8 Nyloc Nut x4 M6x20 Security Screw x2 M6 Saddle Strap x1 2 Part Cover Cap x4 Wall Fixings/ Anchors not supplied 2 Part Cover Cap x4 3.Mark hole locations (X4) using the pre drilled holes in square plate. 4. Drill hole locations (X4) according to your chosen fixings (frame fixings, wall bolts or chemical anchors) depending of the structure of the wall. (Not Supplied) 5. Fix through Plate with suitable fixings (not supplied) in correct orientation and height for intended Key stage. Cover Fixings with 2 Part Caps supplied Spares available from percussionplay.com or from your local distributor Install Instrument with 1.5m free space (from widest point) around it. 1.5m 1.5m

(1.1) Wall Fix Components: 14 Kg Pair Small Red Beaters X1 Cavatina Page 2 of 2 BS EN 1176 Thread Lock Solution Required (Not Supplied) Thread Lock Solution Required (Not Supplied) Instrument Components: M8 Nyloc Nut x4 M6x20 Security Screw x2 M6 Saddle Strap x1 2 Part Cover Cap M8 x4 TX 30 Driver Bit x1 Tools: Wall Fixings/ Anchors not supplied 2 Part Cover Cap M12 x4 Spares available from percussionplay.com or from your local distributor COMPONENTS LIST: M8 2 Part Cover Cap X4 Saddle Strap X1 M6x20 Pin torx X2 M8 Nyloc nut X4 M12 2 Part Cover Cap X4