Painless Performance Products 30112 Installation Instructions

Fort Worth, Texas 76105 817-244-6212 Phone • 817-244-4024 Fax 888-350-6588 Sales • 800-423-9696 Tech E-mail: [email protected] Web: www.painlessperformance.com 30112 ADJUSTABLE FAN THERMOSTAT INSTALLATION INSTRUCTIONS NOTE: This thermostat is to be used with a fan relay to control the fan. If you don’t already have a fan relay you must get one (Painless Part # 30101). 1) Mount the thermostat assembly under the hood in a convenient location as close to the fan and relay as possible using the provided mounting screws. 2) Take the thermostat probe and insert it into the radiator fins carefully as not to damage the radiator core. NOTE: Be very careful when routing the probe and tubing to prevent kinking. NOTE: Depending on the particular radiator you have you may not be able to insert the probe into the fins and may need to mount the probe to the back side of the radiator using plastic tie- wraps, clamps, or a mounting bracket insuring the probe is in the hot air flow of the radiator. 3) Locate the fan relay wire that goes to ignition hot power (relay activation wire) and cut it. Take and connect one of the cut ends to either thermostat terminal and take the other cut end and connect it to the other thermostat terminal. 4) Test the thermostat for proper operation: When the knob is turned all the way counter clockwise the thermostat connects the two gray/white wires and the fan should come on when the ignition switch is turned on. Turning the knob clockwise will increase the temperature that is required to turn the fan on. 30112.doc 07/22/03 1

and Return Policy Chassis harnesses and fuel injection harnesses are covered under a lifetime warranty. All other products manufactured and/or sold by Painless Performance are warranted to the original purchaser to be free from defects in material and workmanship under normal use. Painless Performance will repair or replace defective products without charge during the first 12 months from the purchase date. No products will be considered for warranty without a copy of the purchase receipt showing the sellers name, address and date of purchase. You must return the product to the dealer you purchased it from to initiate warranty procedures. Copyright © 2007 by Perfect Performance Products, LLC 3