National Instruments sbRIO-9628 Quick Reference Manual

sbRIO-9628 Kit Contents Documentation Driver Media USB Cable Screwdriver IDC to DSUB Cable Thermal Kit Standoffs and Screws Power Supply sbRIO-9628 RMC Breakout Board © 2019 National Instruments All rights reserved. Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/ technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015. For a complete list of resources go to the following URL: ni.com/r/sbrio 377897A-03 Oct19 Connect to the Host Computer via Ethernet 1. Power on the host computer. 2. Connect the sbRIO-9628 to the host computer using a standard Category 5 (CAT-5) or better shielded, twisted-pair Ethernet cable. Connect to Power 1. Ensure that your power supply is powered off. 2. Insert the power connector plug into the power connector receptacle of the sbRIO-9628 until the connector latches into place. 3. Turn on the power supply. Connect to the Host Computer via USB 1. Power on the host computer. 2. Connect the USB Type-C 2.0 device port of the sbRIO-9628 to the host computer using a Type-C to Type-A USB cable. OR

Dual-Core 1.33 GHz Processor UART RS-232 UART RS-232 UART RS-485 High-Speed CAN Xilinx Artix-7 100T Real-Time Clock Battery Holder Temperature Sensors Watchdog 4 GB eMMC Disk 1 GB DDR3L RS-232 RS-232 Console Out RS-485 RJ-45 TSN Gigabit Ethernet Port RJ-45 TSN Gigabit Ethernet Port USB 2.0 Host Type-A Connector USB 2.0 Host Type-A Connector USB 2.0 Device Type-C Connector USB 3.1 Host Type-C Connector with DisplayPort MicroSD Connector XCVR XCVR XCVR PHY PHY CAN Port Connector0 (MIO) CAN Controller 5 V 3.3 V SATA 2.0 PCIe x1 Gen 2 USB 2.0 VBAT RMC Connector (240-pin 60x4 Searay) 4x Digital I/O (5 V Tolerant) 16x Multiplexed Analog Input 4x Analog Output 9-30 VDC Input Power Selection and Protection On-board Power Supplies Power Connector Configurable per Module NI-DAQmx Technology Configurable per Module NI-DAQmx Technology Optional System Power 9-30 VDC 2x C Series Module Interface FPGA_VIO [0-47] Digital I/O [0-47], SE/LVDS Digital I/O [48-95], SE/LVDS FPGA_VIO [48-95] 2.5 V/3.3 V Power Selector 2.5 V/3.3 V Power Selector LabVIEW FPGA API Data Path Processor Data Path NI-DAQmx API Data Path Power Path External Connector/Port sbRIO-9628 Block Diagram 1 3 5 7 9 2 4 6 8 10 NC V– (GND) Shield CAN_H NC CAN_L NC V– (GND) NC Shield CAN Pinout 1 3 5 7 9 2 4 6 8 10 DCD TXD GND RTS RI RXD DTR DSR CTS Shield RS-232 Pinout (ASRL1, ASRL2) 13 2 3 4 5 6 7 9 8 10 11 12 1 1 2 3 4 5 1. Power LED 2. Status LED 3. User1 LED 4. User FPGA1 LED 5. SD in Use LED 1. Connector0 (MIO Port) 8. CAN port 2. RS-485 port (ASRL3) 9. USB Type-C 2.0 device port 3. RS-232 port (ASRL2) 10. USB Type C 3.1 host port 4. USB Type-A 2.0 host port 11. RS-232 serial port (ASRL1) 5. USB Type-A 2.0 host port 12. Ethernet ports 6. MicroSD port 13. RMC Connector 7. Power terminal sbRIO-9628 LEDs sbRIO-9628 Parts Locator Diagram 1 3 5 7 9 2 4 6 8 10 GND NC RXD– NC TXD– NC RXD+ NC TXD+ Shield RS-485 (ASRL3) Pinout 2 4 6 10 8 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 46 44 48 50 1 3 5 9 7 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 45 43 47 49 AGND AI8 AI9 AGND AI10 AI11 AGND AI12 AI13 AGND AI14 AI15 AGND AGND AGND AGND AGND AGND AGND AGND AGND DGND DGND DGND DGND AI0 AGND AI1 AI2 AGND AI4 AI3 AGND AI5 AI6 AGND AGND AI7 AO0 AO1 AO2 AO3 NC NC NC NC DIO0 DIO1 DIO3 DIO2 Connector0 (MIO port) Pinout