rollease acmeda AUTOMATE Pulse 2 Setup Instructions

HOW TO SHARE THE HUB: STEP 9 – Setting Limits The shade will be configuring for the new Bottom position. STEP 1 - Share a Hub During the Hub configuration, is possible connect to a shared Hub. STEP 2 - Share a Hub The Hub should be shared from a different account to the current account of the setup. STEP 3 - Share a Hub The shared Hub will be listed on the shared Hubs list to be added. STEP 4 - Share a Hub After to be added, the shared Hub should be listed into the location created on the App. ...

TROUBLESHOOTING: The following scenarios are common issues that may cause connectivity problems during the AUTOMATE PULSE HUB 2 pairing process. If you cannot achieve success connecting the Automate Pulse Hub 2 to your network, please reference the below most common pairing roadblocks. I CANNOT CONNECT TO MY HIDDEN WI-FI NETWORK. The AUTOMATE PULSE HUB 2 does not currently support pairing with hidden networks. To connect to a hidden network, you will need to unhide the network. Once the network pairing process is complete you can re-hide the net ...

HOW TO CREATE FAVORITE MANUAL HUB CONFIGURATION STEP 1 - Configure a Hub If the App don’t recognize the QR Code, should enter code manually. STEP 2 - Configure a Hub Press the Enter code, to type the code of the label to setup the Hub. STEP 4 - Configure a Hub Wait for the Hub connecting to the App. STEP 3 - Configure a Hub Type the code on the label to add the New Hub on the App. STEP 1 – Create a Favorite Device Select the “Plus” icon to add a favorite device in your favorite screen. STEP 2 – Edit a Favorite Device Press “Edit” o ...

STEP 24 – Pair a motor Choose your pairing method: “PAIR USING HUB” or “COPY FROM REMOTE”. *We recommend copying from a remote for the best results. STEP 25 – Pair with Remote Make sure the remote is tuned to the shade’s individual channel (not Ch 0). Remove the remote battery cover and press the upper left P2 button Twice, then “Next”. STEP 26 – Pair with HUB Press and hold the P1 button on the motor head 2 seconds. The motor will jog up and down once and you will hear one audible beep. Press “Pair” on the app screen. ST ...

HOW TO OPERATE SHADES HOW TO CREATE A ROOM STEP 3 - Close a shade Open the shade by pressing “Up arrow” icon or scrolling the black line to the top. STEP 1 – Operate Shade Select the device that you wish to operate. STEP 2 - Open a shade Close the shade by pressing “Down Arrow” icon or scrolling the black line to the bottom. STEP 4 - Move a shade Move the shade to the position desired scrolling the black line to any position. STEP 4 – Create a Room Pick Room Picture to add a new icon to the room. STEP 1 – Create a Room Once the Sha ...

LED STATUS INDICATION: COLOR RESPONSE STATUS Continuous Flashing Blue Automate Pulse Hub 2 is in pairing mode ON Blue ON App is connected to Automate Pulse Hub 2 OFF Automate Pulse Hub 2 is OFFLINE Flashing Orange Automate Pulse Hub 2 is being resetting Signal Icon The Shade is connected with the HUB and works properly. Battery Icon Green The Battery Level is over than 70%. Battery Icon Yellow The Battery Level is between 50% and 70%. Battery Icon Red The Battery Level is less than 50%. Offline mode The motor is offline, and the mobile is not in ...