Rokit EDISON S Operation & User’s Manual

We want to show you how to simply and easily use this amazing 3D printer. It is essen- tial that you perfectly utilize 3DISON S. Thus, carefully read and follow this manual.

Safety Information Specifications Product Function What’s in the Box Printer Overview How to Use 3DISON S 1) Unpacking your 3DISON S 2) Filament Loading and Unloading 3) Leveling the Printing Bed 4) Display Menu Introduction 5) Start 3D Printing Additional Function 1) Youniverse 3D FAQ Product Warranty Certification Mark 3 4 5 6 7 8 9 11 12 14 15 17 19 20 Contents

KC Certification - 3DISON S is certificated by KC, which indicates that 3DISON S meets the requirements of customer protection on safety, health, and environment in Korea. WARNING 1. The 3DISON S generates high temperatures and includes moving parts that can cause injury. Thus, don’t put your hands in the machine while printing. After the printing is completed, wait until the temperature inside the printer goes down. 2. Never reach inside the 3D printer while it is operation. Safe Information

Specifications Printing Maximum Build Size Printing Speed Hot-End(Nozzle) Size Layer Resolution Positioning Precision Printing Material 4.3ℓ(215 X 140 X 145 mm) 40 mm/sec ~ 200 mm/sec 0.4 mm 0.025 ~ 0.3 mm X,Y: 11 micron, Z: 2.5 micron PLA(12color), Nylon(3color), Flexible(2color), HIPS, PVA, Wood, Stone, Heat-Resisting PLA(6color) Hardware Extruder Shaft Thickness Belt/ Pulley Internal LED Lighting 3D Printing with Wireless Auto-Leveling Installation Front Door Pause/Unpause Material Change While Operation Frame Dimension Product Weight Storage Temperature Extruder Temperature Single Extruder System X , Y, Z : 8mm S2M Belt / Pulley O O O O O O 454mm X 300mm X 454mm 10.8kg 10℃ ~ 40℃ 195℃ ~ 250℃ Electronic Input Output 190 ~ 220 v, 50/60 Hz, 3.0 A 24 v, 5.0 A Software Control Program Operating System Compatible File Format Creator K Windows, Mac OS X STL, OBJ

About 3DISON S ● 3DISON S is the FFF(Fused Filament Fabrication) type desktop 3D Printer and the Best-Seller in Korea. 3DISON S is the best performance desktop 3D printer which has 25 micron layer resolution in Z axis and mobile wifi monitoring function. ※ FFF Method : This method works by laying down consecutive layers of material at high temperatures allowing the adjacent layers to cool and bond together before the next layer is deposited. ● 3DISON S uses filament materials in principle and this guide is prepared for the basic operation of 3DISON S. For more details, refer to the additional manual for S/W. Product Function 1. Auto-Leveling: When printing, the Auto-Leveling sensor reads the gap between the printing bed and the Hot-End and level the printing bed without manually adjustment. 2. Auto-Cleaning: Cleaning inside of the Hot-End for stable printing. 3. Auto-Printing: Instant print without detailed settings such as infill, speed or temperature. 4. Mobile Wi-Fi: Apply wireless connection and you can directly print out any 3D content on the website. (Adjust the settings on the website) 5. Monitoring: You can be monitoring the printing in real time once start printing. Product Function

Printer Body SD Card 4GB Quick Guide Mini USB Cable Hex Wrench White Tape Removal Tool Power Cable Grease Filament Power Supply What’s in the Box Tool Bag Filament Cradle Guide Tube 3DISON S Printer Welcome Box Filament Box Accessories 3DISON S Printer Body Mini USB USB Cable, Hex Wrench, SD Card 4GB, Removal Tool, Grease, Tool Bag, Quick Guide Filament 700g White Tape, Power Supply, Power Cable, Guide Tube, Filament Cradle

Printer Overview Door LCD Display Arrows and OK Buton Extruder Printing Bed SD Card Slot USB 2.0 Ethernet Power Switch Power Socket Mini USB Port 1 6 7 8 10 11 9 3 4 5 2 1 2 3 4 5 6 7 9 10 11 8

Do not discard the box and the packing buffers. Save These - They will be handy if you ever need to transport the printer in the future. Unpacking your 3DISON S First, open the box and remove Welcome box. Carefully take out the 3DISON S from the box and put it on a sturdy table. After removing the packing buffers surrounding 3DISON S, check the component set. 1 2 How to use 3DISON S

OK Check if the filament is built up normally in circle shape. (this process goes on for about 30 seconds). Press OK button to stop loading. 5 6 Loading Filament Select Load right. Then the ex- truder will start preheating. Go to the LCD panel and select Utilities > Filament Loading. Once locate a filament roll and the guide tube on the back side of the 3DISON S printer, hang a fil- ament roll up the Filament Cradle. When the extruder is completely heated with the alarm, pass a filament through the guide tube to insert the filament into the ex- truder. 1 2 3 4 How to use 3DISON S

Unloading Filament To remove the filament from the ex- truder, select Utilities > Filament Loading and select Unload Right. When the extruder is completely heated with an alarm, locate the extruder to the middle. Pull the filament out of the ex- truder with the spring block pressed. 1 2 Press the OK button to stop unloading. OK 3 How to use 3DISON S

Leveling the Printing Bed_ Auto Leveling How to use 3DISON S Select Utilities > Level Build Plate on the display menu. Select Home Check to confirm the origin. Select P1 to adjust the number displayed. Adjust circular P1 nut so that the number displayed becomes 0.00. Adjust P2, P3, and P4 to 0.00 as described in #3. 1 2 3 4 In Creator K, put the check mark in the Auto-Leveling item when generating Gcode. Auto-Leveling function automati- cally works during the printing. (Uncheck the Auto-Levelling if you 5 ※ Despite of using Auto-Leveling function, if the gradient of the printing bed is too steep because no zero point leveling has been done, Z axis will operate too much and may lower the quality of the output. ※ When extra force or shock is exerted on the production board, the levelness of the board could be off. ※ Before your first use, please adjust the levelness of the production board as described above to optimize the production quality.

Display Menu Introduction There are 3 configuration items on the display menu; Print from SD, Preheat and Utilities. 1. Print from SD: To load a file from SD Card. 2. Preheat: To preheat the Hot-End(Nozzle) and Platform. - Right Tool : by setting On/Off you can start preheating of the right extruder. 3. Utilities : It will lead to 12 different options for hardware. You do not want to change the settings without any specific explanation because they are only for developers or aftersales service. - Monitor Mode : it shows current temperature of the extruder and printing status. - Filament Loading : to put the filament into the extruder or pull it out of the extruder. - Preheat Settings : to set up temperature and the Extruder. - General Settings : To configure sound, LED color or etc. ● Ditto Printing Off ● Override GCTemp Off ● Pause with Heat Off ● Sound On/Off ● Heat LEDs On/Off ● LED Color : to change LED colors ● Accelerate On/Off ● Extruders ● Extruder Hold On/Off ● HBP Installed Yes/No ● Tool Offset Sys New/Old ● Check SD Reads Yes/No ● P-Stop Control On/Off How to use 3DISON S

Display Menu 설명 - Home Axes : : To default the position of X, Y, Z axis. - Level Build Plate : To manually level the printing bed before start Auto-Leveling. - Auto Level : To adjust Auto-Leveling. - Home Offsets - Jog Mode : To control manually the location of the extruder and the build platform - Cooling Fan Power - Restore Settings - Eeprom How to use 3DISON S

Start 3D Printing Prepare STL or OBJ file you want to print out. You can also easily download STL files from free 3D file websites. Insert the SD card on the right of the printer. Select File > Open and choose STL file you want to 3D print out. Otherwise you can just drag and drop the 3D image file to Creator K. Select the file with the format of .x3g in LCD panel and start printing. (The file of .x3g is only read.) First, select the printer type at the top menu (Printer > Printer type > EDISON S) and click the first icon ‘G-Code’ to generate G-Code. SD card icon color will change, indicating G-Code is has gener- ated successfully. And then click the SD card button to save the file as x3g format into SD card. Print from SD Preheat Utilities 1 5 2 6 3 4 How to use 3DISON S ※ You can also print directly on your Creator K by connecting your computer to the printer with the USB cable without saving and using SD card. ※ You can download this software Creator K and the concerned manual on the ROKIT’s website. (http://en.3disonprinter.com/)

Youniverse 3D_3D Printing with the Wireless Connect the provided Mini USB cable to the both USB ports on the left side of 3DISON 3D Printer, and then turn on the power. Select ‘Youniverse 3D BOX setting(설정)’ at the top right of the menu and input data into the blanks. (Mac address and S/N are around the pow- er button of 3D printer.) Choose a content that you want to print out in category and click the ‘Print’ button. Then, set the optimized settings and click the ‘Print’ button. Printing is started after slicing process. (The slicing time to generate G-Code is depend on the object.) Search the Wi-Fi and connect to [YOUNI_BOX]. (P/W:00000000) When clicking ‘출력상황 확 인’ button at the top right of the manu, you can check the printing in real time. Open Internet Browser on a com- puter or mobile phone and get on the internet address ‘192.168.0.1/ index.html’ WIFI Input Wi-Fi Name and password connecting with 3DISON 3D printer. (When click OK button and the connection is com- pleted, YOUNIVERSE 3D BOX is au- tomatically rebooted) Connect to the website YOUNI- VERSE 3D (www.youniverse3d. com) with a computer or mobile APP and log in. (Sign up the website) 1 5 6 2 7 3 4 YOUNIVERSE 3D

Youniverse 3D_Camera Setting Clicking ‘출력상황 확인’ but- ton at the top right of the menu, you can check the printing in real time. Check IP number connected to the machine. Go to the settings page of the router by entering the address of your router on the internet browser. After selecting [Port forwarding Setting] on the menu, type the port and IP address which you already checked. (Port : 8080) 1 2 3 4 YOUNIVERSE 3D

Hardware FAQ What if the filament is not properly discharged? - There are a few causes to prevent filaments from coming out well. One of the most common causes is when is clogged. When this happens, set the extruder temperature higher than 240℃ at [Utilities] > [Preheat Setting], and use [Preheat] function of display menu to melt the filaments accumu- lated inside the nozzle, whereby the nozzle can be unclogged. (Reduce the extruder temperature again after use). If the method mentioned above fails to solve the problem, use a hex wrench to unscrew the two bolts positioned at an upper surface of the extruder and the two bolts positioned at a lower surface of the extruder, separate the two parts and check if filament scraps clog the nozzle hole. Next, unclog the nozzle hole using a long unfolded clip or a smallest hex wrench provided at the time of purchase while the extruder is under a preheated state (do the separation work while the power is turned off after preheat. Malfunction may occur if fan separation work is performed while the extruder is under the preheat state) - Malfunction may also occur when the gear extruding the filament is not properly operated. If malfunction occurs, dismantle the extruder, and remove the wastes accumulated on the gear using a brush such as tooth brush, then the problem can be solved. - It is also important to set the extruder temperature according to material. If the extruder temperature is too high or too low, the material may hold together, or may not be properly solved to prevent a smooth output. Be sure to check the proper temperature according to the used material. Is multi colored printing available with 3DISON S at one time? - You can get the multi colored output by using the function ‘Pause/Unpause’ Is it possible to adjust the printing speed and temperature on the machine while printing? - Yes. When pressing the OK button on the machine, you can adjust the printing speed and temperature while printing. Moreover, you can control the printing such as temporary stop printing or cancellation. What is the Auto-Leveling? - Auto-Leveling is the function that the horizontality of the printing bed is automatically adjusted. Thus, all users can easily use 3D Printing without fine adjustment.