Sena ECONO Operation & User’s Manual

with your buddies, hear directions from your GPS and more, all through your Econo Bluetooth® Open-Face Helmet. With built-in Bluetooth® capabilities, HD Intercom, technology has never felt so minimal or freeing. Bluetooth® 3.0 800 meters (880 yards) One-to-One Intercom Versatile Jog Dial FM Radio Firmware Upgradeable

firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product. 2. Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products. SENA Technologies, Inc. sena.com Customer Support: support.sena.com

1. ABOUT THE ECONO BLUETOOTH HELMET 7 1.1 General Information 7 1.2 Product Details 8 1.2.1 Bluetooth System Button 9 1.3 Package Contents 9 1.4 Wearing the Helmet 9 1.4.1 Putting on the Helmet 9 1.4.2 Removing the Helmet 10 1.4.3 Removing Shield Visor 10 1.4.4 Installing Shield Visor 11 1.4.5 Removing Cheek Pad 11 1.4.6 Installing Cheek Pad 12 1.4.7 Removing Inner Pad 12 1.4.8 Installing Inner Pad 13 1.4.9 Removing Sun Visor 13 1.4.10 Detachable Inner Parts 14 1.5 Pre-Ride Helmet Inspection 14 1.5.1 Checking the Exterior 14 1.5.2 Checking the Chinstrap 14 2. GETTING STARTED: BLUETOOTH SYSTEM 15 2.1 Powering On and Off 15 2.2 Charging 16 2.3 Checking the Battery Level 17

17 2.5 Downloadable Sena Software 17 2.5.1 Sena Device Manager 17 3. Pairing the Bluetooth System with other Bluetooth Devices 18 3.1 Mobile Phone Pairing 18 3.2 Second Mobile Phone Pairing 19 4. MOBILE PHONE USAGE 19 4.1 Making and Answering Calls 19 4.2 Speed Dialing 20 4.2.1 Assigning Speed Dial Presets 20 4.2.2 Using Speed Dial Presets 20 5. STEREO MUSIC 21 5.1 Playing Music with Bluetooth Devices 21 6. BLUETOOTH INTERCOM 21 6.1 Intercom Pairing 21 6.2 Two-Way Intercom 22 7. USING THE FM RADIO 22 7.1 FM Radio Operation 22

23 8.2 Configuration Menu 23 8.2.1 Assigning Speed Dial 24 8.2.2 VOX Phone (Default: Enable) 24 8.2.3 Voice Prompts (Default: Enable) 24 8.2.4 Delete All Pairings 25 8.3 Firmware Upgrades 25 9. TROUBLESHOOTING 25 9.1 Fault Reset 25 9.2 Factory Reset 25 10. MAINTENANCE AND CARE 26 10.1 Outer Shell 26 10.2 Inner Lining 26 10.3 Storing the Helmet 26 QUICK REFERENCE 27

This product is a motorcycle helmet. Do not use it for any other purpose than riding a motorcycle. If you use the helmet for anything else, it may not provide sufficient protection in an accident. No helmet can protect the wearer against all possible impact scenarios. For maximum protection, the helmet must fit properly on the head and its retention strap securely fastened under the chin. With the retention system comfortably but firmly adjusted, the helmet should allow sufficient peripheral vision when secured. If the helmet is too large, it may move on your head while riding. If the helmet can be removed when pulled from the back in an upward and forward direction, it’s not fitted properly. This could cause the helmet to obstruct your vision while riding or come off in an accident, resulting in personal injury or death. Please refer to Section 1.4: “Wearing the Helmet” for more details about properly securing and wearing your helmet. The contents of this helmet User’s Guide are subjected to change without notice. Its illustration may differ from the actual product. The copyrights for the User’s Guide belong to Sena Technologies, Inc. Reproduction or copying of the User’s Guide without permission is strictly prohibited. 1. ABOUT THE ECONO BLUETOOTH HELMET

1.2 Product Details Left 2 1 3 4 5 6 7 8 9 No. Name 1 Microphone 2 Sun Visor 3 Shield Visor 4 Top Vent 5 Shell 6 Rear Vent 7 Shield Ratchet 8 Sun Visor Lever 9 Rubber Trim Top 1 2 No. Name 1 Top Vent 2 Side Vent Right 2 1 3 4 5 No. Name 1 Chinstrap 2 DC Power Charing & Firmware Upgrade Port 3 Jog dial 4 Speaker 5 Status LED

1.2.1 Bluetooth System Button Rotate/Rotate while Pressing Tap/Press and Hold 1.3 Package Contents Econo Helmet Helmet Pouch USB Power & Data Cable Reflex Stickers (4) 1.4 Wearing the Helmet 1.4.1 Putting on the Helmet 1. Unfasten the chinstrap by using the retention system. 2. Expand the helmet opening with your hand, and slide your head into the helmet. 3. To fasten the chinstrap as tight as possible without causing you pain.

1.4.2 Removing the Helmet 1. Fasten the chinstrap by using the retention system. 2. Gently pull the padded chinstrap outward and slide the helmet off your head. Note: Fastening the chinstrap after removing the helmet will help avoid scratching surfaces it’s placed upon. Quick-release retention system 1 2 Chinstrap One-touch Bracket Strap Ladder 1.4.3 Removing Shield Visor 1 2 1. Open a shield visor to fully opened position. 2. Pull the trigger down and pull out the shield visor at the same time. 3. Repeat the process on the other side.

1.4.4 Installing Shield Visor Hook C 1 2 Hook A Hook B 1. Open a shield visor to fully opened position, and insert hook C. 2. Pull the trigger down and insert hook A and hook B. 3. Repeat the process on the other side. 1.4.5 Removing Cheek Pad 1. Remove the three snaps of the cheek pad from the helmet. 2. Remove a lower portion of a cheek pad from a bracket. 3. Pull the rear of the cheek pad off the helmet.

1.4.6 Installing Cheek Pad 1. Pass a chinstrap through holes of cheek pad, insert the plastic plate of cheek pad into a space between shell and EPS. 2. Insert the cheek pad plastic plate a bracket. 3. Clip the three snaps of the cheek pad to the three snaps of helmet. 1.4.7 Removing Inner Pad 1. Hold near a plate and pull out plate. 2. To remove a rear center pad, release two hooks of center pad bracket.

1.4.8 Installing Inner Pad 1. Insert a plastic plate to the front center pad. 2. Insert the two snaps of rear neck pad until you hear a click. 1.4.9 Removing Sun Visor 1 2 3 1. Slide the sun visor lever in the direction of the arrow so that the sun visor is lowered. 2. Hold your hand near the hook of the visor and pull it in the direction of the arrow. 3. Repeat the process on the other side.

1.4.10 Detachable Inner Parts Inner Pad Cheek Pad(R) Cheek Pad(L) 1.5 Pre-Ride Helmet Inspection 1.5.1 Checking the Exterior Check the helmet regularly for damage. Small, superficial scratches will not impair the helmet’s protective qualities. In the case of more serious damage (cracks, dents, flaking and cracking paint, etc.), the helmet should no longer be used. 1.5.2 Checking the Chinstrap 1. Ensure that the chinstrap is properly routed under your chin.

2. To test the chinstrap tension, slip your index finger under the chinstrap and pull. If the chinstrap is loose under the chin, it needs to be tightened. If the chinstrap loosens when you pull on it, the helmet is not properly fitted. Undo the chinstrap completely and try fastening it again, then repeat the test. 3. If you are unable to fasten the chinstrap so that it fits firmly against the chin, check that your helmet is still the right size for you. Note: Repeat the test after each adjustment. CAUTION: Never ride with the chinstrap unfastened or incorrectly adjusted. The chinstrap should fit correctly and should not become loose when pulled. The fastener is not correctly closed if the chinstrap becomes loose when pulled. 2. GETTING STARTED: BLUETOOTH SYSTEM 2.1 Powering On and Off • Power On Rotate while pressing the Jog dial clockwise for 1 second. • Power Off Press and hold the Jog dial for 5 seconds.

2.2 Charging The Bluetooth system can be charged using many common methods via the supplied USB power & data cable: the Econo is compatible with 5 V input USB- charged devices only. Depending upon the charging method, the Bluetooth system will be fully charged in about 3 hours. Note: • Please make sure to take off your helmet while charging. The Bluetooth system automatically turns off during charging. • Any 3rd party USB charger can be used with Sena products if the charger is approved by either the FCC, CE, IC or other locally approved agencies that Sena accepts.

2.3 Checking the Battery Level When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70 ~ 100% 3 flashes = Medium, 30 ~ 70% 2 flashes = Low, 0 ~ 30% 2.4 Volume Adjustment You can raise or lower the volume by rotating the Jog dial. Volume is set and maintained independently at different levels for each audio source (i.e. phone, intercom), even when the Bluetooth system is rebooted. • Volume up/down Rotate the Jog dial clockwise or counterclockwise. 2.5 Downloadable Sena Software 2.5.1 Sena Device Manager The Sena Device Manager allows you to upgrade the firmware and configure its settings directly from your PC or Apple computer. For more information on downloading the Sena Device Manager, please visit sena.com.

devices for the first time, they’ll need to be “paired”. This enables them to recognize and communicate with one another whenever they’re within range. The Bluetooth system can pair with multiple Bluetooth devices such as mobile phone, MP3 player, GPS or Sena SR10 Two-Way Radio Adapter via Mobile Phone Pairing, Second Mobile Phone Pairing. The Bluetooth system can also be paired with another Sena headset or Bluetooth system. 3.1 Mobile Phone Pairing 1. Turn off the Bluetooth system. 2. Rotate while pressing the Jog dial clockwise for 5 seconds. 3. Rotate the Jog dial until you hear the voice prompt, “Phone pairing”. Search for Bluetooth devices on your mobile phone. 4. Select the Econo in the list of the devices detected on the mobile phone. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 3. Pairing the Bluetooth System with other Bluetooth Devices

3.2 Second Mobile Phone Pairing Pairing with Additional Mobile Phone, GPS, MP3 Players or Sena SR10 Two-way Radio Adapter. 1. Turn off the Bluetooth system. 2. Rotate while pressing the Jog dial clockwise for 5 seconds. 3. Rotate the Jog dial until you hear the voice prompt, “Second mobile phone pairing”. Search for Bluetooth devices on your mobile phone. 4. Select the Econo in the list of the devices detected on the mobile phone. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 4. MOBILE PHONE USAGE 4.1 Making and Answering Calls • Answering/Ending a call Tap the Jog dial. • Rejecting a call Press and hold the Jog dial for 1 second. • Make a Call with Voice dialer Rotate while pressing the Jog dial clockwise.

4.2 Speed Dialing 4.2.1 Assigning Speed Dial Presets You need to assign speed dial numbers before using the speed dial. Speed Dial Presets could be assigned in the settings menu. 4.2.2 Using Speed Dial Presets 1. Rotate while pressing the Jog dial counterclockwise. 2. Rotate the Jog dial to navigate between the menus. You will hear voice prompts for each menu item. 3. Tap the Jog dial to select a voice menu among the followings: (1) Last number redial (4) Speed dial 3 (2) Speed dial 1 (5) Cancel (3) Speed dial 2 4. To redial the last number called, tap the Jog dial when you hear a voice prompt saying “Last number redial”. 5. To call one of the speed dials, tap the Jog dial when you hear the voice prompt, “Speed Dial (#)”. 6. If you want to exit the speed dial immediately, rotate the Jog dial until you hear a voice prompt saying “Cancel”, and tap the Jog dial.

• Play or Pause music Press and hold the Jog dial for 1 second. • Track forward/back Rotate while pressing the Jog dial clockwise or counterclockwise. 6. BLUETOOTH INTERCOM 6.1 Intercom Pairing The Bluetooth system can only have an intercom conversation with Bluetooth system, Sena headset or helmet. Intercom friend B YOU 1. Turn off the two Bluetooth system (A and B) that you would like to pair with each other. 2. Rotate while pressing the Jog dial clockwise for 5 seconds. 3. Rotate the Jog dial until you hear the voice prompt, “Intercom pairing”. 4. Simply tap the Jog dial of any one of the two Bluetooth system A or B and wait until the intercom connection is automatically established. 5. STEREO MUSIC

6.2 Two-Way Intercom You can start/end an intercom conversation with one of any intercom friends by tapping the Jog dial. • Staring/Ending Two-way Intercom Tap the Jog dial. 7. USING THE FM RADIO 7.1 FM Radio Operation • Start or Stop the FM radio Press and hold the Jog dial for 3 seconds. • Seek up/down the radio channel Rotate while pressing the Jog dial clockwise or counterclockwise.

The Bluetooth system operates in the following order of priority: (highest) Mobile phone Bluetooth Intercom FM Radio (lowest) Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. 8.2 Configuration Menu You can set the configuration of the Bluetooth system by the voice menu instruction described below. 1. Power off the Bluetooth system. 2. Rotate while pressing the Jog dial clockwise for 5 seconds until you hear a voice prompt, “Configuration menu”. Configuration Setting Enable/Disable or Execute Phone Pairing None Second Mobile Phone Pairing None Intercom Pairing None Speed Dial Execute VOX Phone Enable/Disable Voice Prompts Enable/Disable Delete All Pairings Execute Factory Reset Execute Exit configuration Execute 8. GENERAL SETTINGS