Sealey AK459DX.V2 Manual
Text of the manual
Gravity & suction feed/air discharge
oil drainer
model no: AK459DX.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQU
Drain the air tank daily. Water in the air line may damage the drainer.
4.5.
Clean the air inlet filter screen weekly.
4.6.
Line pressure should be increased to compensate for unusually long air hoses.
5. assembly
5.1.
Fit the venturi pump and gauge assembly to the reservoir tank, ensure the gasket is properly positioned. Tighten the nut using a
suitab
Make sure valves (fig.7.3,4 and fig.8.5) are closed.
6.3.2.
Open valve (fig.8.6).
6.3.3.
Connect compressed air (0.5Bar/7.25psi) to quick
coupling (fig.7.2). open the valve (fig.7.1) until all the
fluids have been transferred from the reservoir.
6.3.4.
Disconnect from air supply and vent any pressure
remaining in the reservoir by openin
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
[email protected]
www.sealey.co.uk
Environment Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner w
