Satel ASD-100 Manual
Text of the manual
SMOKE AND HEAT DETECTOR
ASD-100
asd100_en 08/08
The ASD-100 wireless smoke and heat detector is designed for operation as part of the
ABAX two-way wireless system. It is supported by the ACU-100 controller with firmware in
version 1.06 or later.
The ASD-100 detector is signaling alarm after detection of visible smoke (optical detector) or
after r
The detector is designed for indoor installation. It should be mounted on the ceiling, at least
0,5 m away from the walls.
Before mounting the detector permanently, check the level of signal received by
the ACU-100 controller from the detector and, if necessary, change the place of
installation so as to select the optimum loca
7. Close the detector housing.
3. Technical data
Working frequency band......................................................................868.0 MHz ÷ 868.6 MHz
Radio communication range ............................................................up to 400 m (in open area)
Power supply ......................................................
SATEL sp. z o.o.
ul. Schuberta 79
80-172 Gdańsk
POLAND
tel. + 48 58 320 94 00
[email protected]
www.satel.pl
