RUPTELA Fatigue Sensor Manual
Text of the manual
1.1 About the Functionality
The fatigue sensor is a driver monitoring sensor, from which you can request real-time pictures
when driver fatigue/distraction is detected or on-demand via an SMS command. The pictures are
stored in the SD card of the tracking device or the internal sensor memory in a .jpg format. The user
can remo
1.4 Contact Information
General enquiries
Website: ruptela.com
E-mail: [email protected]
Phone: +370 5 2045188
Technical support
E-mail: [email protected]
Phone: +370 5 2045030
1.5 Document Changelog
Version Date
Modification
2.0
2020-07-
Updated: Connection schematics.
Updated: Compatible devices list.
Updated: Manual design and construction.
1.6 Notatio
Principles of Operation
2.1 Operation
Once the sensor detects a distracted or drowsy driver, it will immediately send out a sharp and loud
alarm. At the same time, the sensor’s camera will take a picture.
If the fatigue sensor is enabled in the configuration, it will send the gathered data (file name, source
ID and alert ID) to the tracking device. If
3.1 Connection to 5th Gen Advanced Family Devices
Connect the fatigue sensor to your tracking device as follows (Port A is used in this schematic):
Alternatively, TX and RX wires can be connected to Port B (16 pin connector, pin 3 and 11,
pink/green wire, red/cyan wires).
3.2 Connection to 4th Gen Advanced Family devices
Connect the fatigue sensor to your tracking device as follows (Port A is used in this schematic):
Alternatively, TX and RX wires can be connected to Port B (14 pin connector, pin 3 and 1,
orange and yellow wires).
