LevelOne FCS-1060 Setup Manual
Text of the manual
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
Setting up Level One IP Camera (Model FCS-1060)
1. Login to `192.168.0.99’ (default Level One IP Camera Address)
a. Username: administrator (default)
b. Password: (blank)
2. After login, click `Configuration’.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
For Network Setup
1. Under Configuration, Click `Network’.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
2. Fill in the box.
a. IP Address: 192.168.0.99 (IP Camera Address).
b. Subnet Mask: 255.255.255.0 (default).
c. Gateway: (your modem IP Address).
d. DNS: (For streamyx user, 202.188.0.133, 202.188.1.5).
e. Click `Save’.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
For FTP Setup
1. Under Configuration, Click `Email and FTP’.
2. Fill in the box.
a. FTP Server IP: www.epicamera.com.
b. Account: (FTP Login ID).
c. Password: (FTP Password).
d. Directory: (/Camera No. /) via “/Cam1/” or “/Cam2/” or “Cam32/”.
e. Click `Save’ to save your setting.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
To Turn on FTP service
1. Under Configuration, Click `Application’ and click`Snapshot #1’.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
2. `Enable’ snapshot #1. Trigger option; choose `Sequential’ and type in snapshot
interval timer. Choose send snapshot by `FTP’ and Click `Save’.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
Configure Motion detection
1. Under Configuration, Click `Motion detection’ and `Enable’ motion detection.
If you face any problem during setting up your camera, please do not hesitate to email us at [email protected].
Our technical support will get back to you as soon as we can. Thanks.
2. Under `Snapshot’ option, `Enable’ snapshot #1. To configure schedule, choose
desire days and time. Under Trigger, choose `Motion detection’. Send snapshot by
`FTP’ and Click `Save’.
