KwickScreen Duo Operation & User’s Manual

The most flexible space management solutions Portable, retractable, printable privacy screens; creating private and dignified spaces adaptable to multiple uses. all-guides com

www.kwickscreen.com / [email protected] 020 845 25975 GENERAL INSTRUCTIONS Please read all instructions in this user guide prior to installation and operation of your KwickScreen. For personal and operational safety use only parts approved by KwickScreen. Before installation ensure all parts are present, complete and without defects. If you believe parts to be missing please contact us. Packaging material should be disposed of in accordance with local rules and regulations. Push and pull the front handles gently during operation. If they need to be forced please contact us. If there is resistance or you hear a crumpling sound then stop, pull out and push in again gently. KwickScreens are designed for use on smooth, horizontal surfaces. Extra care should be taken when using on other surfaces. Make sure the front handles are vertical and that its wheels are all in contact with the floor. When moving the KwickScreen Duo check all four brakes have been released. The unit should then be moved using the main body base handles. Do not run when using a KwickScreen. If leaving the KwickScreen on an incline please ensure all brakes are engaged. CONTENTS Welcome View & Dimensions Unit Assembly Guide Replacing or Changing Inner Panels Cleaning

Thank you for choosing to purchase from KwickScreen. I hope that your new KwickScreen will help you make better use of your spaces and if you have chosen a printed screen, that you enjoy the benefits which the images can bring to your environment. I am passionate about using technology to improve environments. As a designer and engineer I invented the KwickScreen to help solve space issues. For a room to be used efficiently and appropriately it needs to be flexible both spatially and visually. Every multi-use room, from a hospital ward, to a gym, a private meeting room or an airport has problems and limitations that can be solved by space saving portable screening systems. Over the last ten years the product has developed significantly, winning a number of design and innovation awards. We now have an international supply chain with distribution in Europe, North Asia, America and the Middle East. Our customers and those who use and interact with our screens remain our top priority and we are always striving to both improve the product and our service to you. This is our passion and that is why we assemble and quality check every product ourselves locally in England. We hope that you have received the product in a perfect condition, but if for any reason you are unhappy or have a query please let us know and we will do our best to help. Each unit and screen has a unique code making it possible for us to trace all relevant information about the product. (The unit number Uxxx is on the back of the unit on the silver sticker and the screen number Sxxx is on the inside of the screen.) KwickScreens are used in all manner of places, so if you can we would love to receive pictures and feedback from you about using your KwickScreen whether it’s a query, comment or suggestion. Please find us on social media @KwickScreen or alternatively get in touch via our website www.kwickscreen.com. I wish you many years of use from your KwickScreen and look forward to hearing from you. Michael Korn Inventor and Co-Founder of KwickScreen

Fully Assembled Weight: 24 kg Bases Weight: 5 kg Unit Weight: 19 kg 140mm/5.5in 219mm/8.6in 1902mm/74.9in 100mm/3.9in 6360mm/250in 590mm/24in 360mm/14.2in 3110mm/122in

Body Unbraked Castors for Handles Castor Pins 13mm Spanner Main Body Base Front Handle Bases x1 x1 x4 x2 x4 x8 x1 x2 Please read the following instructions. This is a two person job. Please ensure all screws are tight after assembly. If you have any questions please contact us at: www.kwickscreen.com call us on: 020 845 25975 or email us: [email protected] 3mm Allen Key x1 x1 M6 BTN Screws M5 Cap Head Screws 4mm Allen Key Main Body with Two Inner Screens You will need to supply: Included:

Insert castor pins and tighten very well Step 1 Step 2 x4 x1 x4 You will need: MAIN BASE ASSEMBLY all-guides com

x2 x4 x1 Tighten very well Step 1 HANDLE BASE ASSEMBLY You will need: x4

brakes onto handle base, and repeat for other base. Step 2 When repeated you will have two handles bases matching this

3mm Allen Key x1 Tighten screws very well x1 x1 Make sure the flat side is against the body ASSEMBLING BASES TO BODY For this step you will need:

4mm Allen Key x1 There are two screws per base. Tighten screws very well x2 For this step you will need:

panel in one hand, slowly zip along the top of the panel as you unroll the panel. Extend unit fully (unit shown with screen panel removed) by applying all four brakes on the main body and pulling out the handle. 1 2 3 To insert the inner panel, keeping it rolled up, and attach the zip in the top left corner. To get started one person should roll whilst the other starts the zip. REPLACING OR CHANGING THE INNER PANEL (2 person job)

the front handle Leave 50cm unzipped and thread the panel end around the plastic core. Carefully zip up the internal zip on the panel to secure it to the rotor and then zip the top zip to the end. main body front handle 6 5 4 Close the bottom zip

It’s smooth surfaces are easy to clean and designed to withstand regular cleaning. The body is made of anodized aluminium, other metal parts are powder coated steel. The screen panel is made with polyester film. Surfaces can be cleaned using most healthcare cleaning solutions including quaternary, bleach solutions or sporicidal and virucidal disinfectants. Hyplochlorite may also be used on the screen material. Hypochlorite can be applied at 1000-10000 ppm or a 60% alcohol solution. • Wax polishes or solvents • Products with an abrasive surface as steel wool • Detergents which can form lime or synthetic detergents • Alkalis (over pH10) • Solvents • Gasoline • Greases or oils • Abrasive cloths or kitchen scouring compounds to clean the printed screen panel • Any sharp instruments or razor blades to scrape the surface Do not clean in direct sunlight or in elevated temperatures. If normal cleaning does not remove all stains the following cleaning agents may be used at room temperature: ·Methyl butyl alcohol ·Naptha VM&P ·Ethyl alcohol ·Isopropyl alcohol Care should be taken with printed panels when using alcohol based agents. WHEN CLEANING THE KWICKSCREEN DO NOT USE: AFTER CLEANING, LEAVE THE SCREEN EXTENDED TO DRY DO NOT RETRACT WHILST THE SCREEN IS WET Deep cleaning is recommended every 3-4 months. To deep clean, fully extend the screen and clean inside the body. CLEANING !

Or visit us at: Unit 3, Phoenix Trading Estate, Bilton Road, London. UB6 7DZ DAMAGE PROCEDURE If you do experience any problems or damage with your screen, please email us (with images if applicable) to [email protected]. Printed on 100% recycled paper. If you have any questions please contact us at: www.kwickscreen.com / [email protected] all-guides com