Koala Kare KidSitter Usage Instructions

This product is designed to be used as a high chair or an infant seat cradle to secure an infant seat carrier. Koala Kare Products A Division of Bobrick 6982 South Quentin St., Centennial, CO 80112 Main303.539.8300 Toll Free888.733.3456 Fax303.539.8399 Koalabear.com P/N 1276 November 2016 • Ensure that the plastic seat is positioned on the top of the legs and that the warning label is visible. • Release the strap from the buckle on the outside of the high chair leg. • Pull the strap through the hole on the side of the seat where the buckle is located. • Release the buckle that secures the strap and pull it through both holes on the seat. • Lift the seat upwards, allowing it to pivot forward between the high chair legs. • Product now allows for an infant car seat carrier to be placed where the seat was located. Position the infant car seat carrier so that it is secure between the legs of the product. Follow the directions on the labels (visible at the top of the legs) and place infant car seat carrier perpendicular to the round cross bar on the chair, so that the child is facing away from suspended seat. • When the infant car seat carrier is securely in place, the strap must be tightly fastened across the infant car seat carrier. To secure the infant car seat carrier, position the strap across the middle section of the infant car seat carrier. Thread strap through the buckle on the high chair leg and adjust until it fits securely against the infant car seat carrier. • Place child in the high chair. • Rethread the strap through the hole in the seat and into the buckle. • Once child is in place, adjust the strap until it fits securely against the child’s waist, ensuring that the buckle is tightly latched. TO USE THE KIDSITTER® AS A HIGH CHAIR TO CONVERT FROM THE HIGH CHAIR POSITION TO AN INFANT SEAT CRADLE

chair with a soft rag using a non-abrasive cleaner. Important: DO NOT USE BLEACH on this product. May cause discoloration. Use of bleach on this product will void warranty. Do not use abrasive cleaners as they can scratch the product. ® Koala KidSitter® Usage Instructions Dual Use Plastic High Chair and Infant Seat Cradle WARNING: Do not leave the child unattended. Prevent serious injury or death from falls or sliding out. Always secure child with the restraint strap. Always keep child in view while in the high chair or the infant car seat carrier. Never leave child unattended. Make sure strap is correctly fitted to child before use. Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires etc. in the vicinity of this product. Do not use this product if any part is broken, torn or missing. WARNING: When using this product as a high chair, the product is designed to be used by an infant or child capable of sitting upright and unassisted. Waist restraint strap should be buckled at all times when in use. The child should be secured in the high chair or infant cradle at all times by the restraining system. This product is for commercial use only. Not intended for home use. Do not use at home. MAINTENANCE When in use as a high chair, adjust the strap until it fits securely against the child’s waist, ensuring the buckle is tightly latched. When in use as an Infant Seat Cradle, adjust the strap until it fits securely against the infant car seat carrier, ensuring the buckle is tightly latched. RESTRAINT USAGE WARNING!