Littlite L Series Mounting Instructions
Text of the manual
Goosenecks and Accessories
Surface Mounting Your Littlite Lampset
All L-series Littlite lampsets are designed to be surface mounted without any additional
accessories required. The lampset can be mounted from the top or underside of the mounting
surface.
MOUNTING FROM THE TOP OF THE MOUNTING SURFACE.
Remove the Chassis Plate Screws {C} from the top of the l
Once the chassis plate {A} is removed position it on the mounting surface and secure it to the
surface via the two screw holes {E} on the plate. (Figure 3).
Figure 3.
Reattach the chassis and install the chassis plate screws {C}.
MOUNTING FROM THE BOTTOM OF THE SURFACE
Turn over your Littlite lampset and locate the two threaded posts {B} on the bottom of the
AUTOMOTIVE SERIES LITTLITES
Directions for surface mounting L-5 and L-9 automotive series Littlite are identical to the standard
lampsets except for the location of the cord set {D} (Figure 6)
Figure 6.
Because the cord set {D} is routed through the bottom of the chassis plate {A} a hole is required
in the mounting surface to accept the cord set an
Gently compress the stress relief with a pair of pliers and carefully pull it out of the hole and pull
the cord set {D} through the hole. The chassis plate {A} will now be free to position on the
mounting surface.
Mark the mounting surface for screw holes {E} and access hole for the cord set {D}.
Drill hole for cord set.
Pull the cord set {D} through the ho
