LIMIT LIDD266 Instruction Manual

Specifications

Brand: LIMIT
Category: Refrigerator
Model: LIDD266 (Instruction Manual)
File Type: PDF
File Size: —
Pages: 27

Read Online

Read the LIMIT LIDD266 Instruction Manual online using the built-in PDF viewer.

Text of the manual

• This appliance can be used by children aged from 8 years

and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance by the user must not be carried out by children, unless they are aged 8 years or over and only under adult supervision. Keep the appliance and its cable out of reach of children under 8 years of age. • This appliance can be used by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children must not use the appliance as a toy. • If the supply cord is damaged, it must be replaced by the order to avoid a hazard. • This appliance is intended to be used in household and similar applications such as: – environments; – farm houses; – by clients in hotels, motels and other residential type environments; – bed and breakfast type environments. • WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. • WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • WARNING: Do not damage the refrigerant circuit. • WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. • Do not store explosive substances such as aerosol cans with a . • . • Regarding the information for the installation, operation, maintenance and disposal of the device, refer to the following paragraph of the instruction manual. • • For disposal of product, refer to and . • For the replacement method of light bulb, refer to . 3 2

Description of the device

1. Thermostat knob 2. Glass shelf 3. Vegetable box cover 4. Vegetable box 5. Freezer drawer 6. Bottom drawer 7. Door balcony 8. 2L bottle balcony 9. Adjustable feet NOTE: The appliance design is subject to change without prior notice. 5 1 2 3 4 5 6 9 8 7

time to allow the system to settle. Do not position next to any heat source e.g.

cooker, boiler or in direct sunlight etc. Allow at least 10cm of space at the top and 10 cm of space on both sides of the appliance and between the back of the appliance and the wall for adequate air circulation. The appliance is not designed for recessed installation (“building in”). installation, slight unevenness can be overcome by adjusting the front feet. NOTE: once the appliance has had time to settle. • This appliance is designed to operate in ambient temperature between 16°C and 43°C. If these temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the ambient temperatures are exceeded for long periods, the temperature in the freezer section will rise above -18°C and food spoilage may occur. • Remove all packaging materials from the appliance. Wash the inside of the cabinet with lukewarm water and bicarbonate of soda (5ml to 0.5 liter of water). Dry the appliance thoroughly. • maximum position for at least 2 hours before introducing food to be stored, and then readjust to the normal position. • If there is a power failure, do not open the door. lasts for less than 12 hours. If the failure is longer, then the food should be checked and either eaten immediately or cooked and then re-frozen. SETTING THE THERMOSTAT KNOB The refrigerator is controlled with a thermostat knob located inside the fridge, towards the upper right-hand corner. Turn the knob from the MIN position towards the higher numbers for colder temperatures. The knob can be adjusted from setting MIN, MED, MAX. Higher settings on the knob (MAX) mean lower temperatures (colder) in all compartments of the appliance. correct setting of the temperature control knob, depending on your ambient conditions. Set the thermostat knob to a middle position to achieve -18°C in the freezer compartment. Please Note: appliance or re-inserting the plug into the wall outlet. This is to allow the protection device in the compressor to reset. If the compressor fails to start correctly remove the plug and wait for 5 minutes before you try again then the compressor should restart normally. • The room temperature • How often the door is opened • How much food is stored • Position of the appliance When you set the correct temperature, all these factors mentioned above shall be taken into account. 7 6

SHOPPING FOR FROZEN FOOD

The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food. When you are buying frozen food, look at the Storage Guidelines on the packaging. You will be able to store each item of frozen food for the period shown against the 4 star rating. FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing alone does not improve the food. . plastic bags or stored in airtight containers. This will prevent food from dehydrating and to prevent any strong odors of some foods transferring to milder ones. To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to avoid cross contamination. Do not allow raw meat to come into contact with cooked foods. For safety, only store raw meat for two or three days. Fruit and vegetables should be thoroughly cleaned and placed in the crisper. Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door. NOTE: the temperature in the refrigerator. If required, change the thermostat temperature settings. Reverse door STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from defrosting and spoiling. All storage recommendations printed on the packaging of frozen food by the manufacturer should always be followed. position for at least 2 hours before introducing food to be stored, and then readjust it to the normal position. are removed. MAKING ICE CUBES 1. Fill the ice tray with ¾ full of clean water. 2. Place the tray in the top freezing drawer. 3. Close the door. To remove the ice cubes from the tray, put the tray under running water for a while and then twist the tray slightly to loosen the ice cubes. Follow the following stages to reverse the door from its initial position. 1. Remove the hinge cover. Remove the hinge cover 9 8

2. Remove three screws with suitable tools.

efully the fridge compartment door. 3. Remove middle hinge, screws, screw caps and plastic inserting nails. Install them on the other side. . Remove three screws 4. The disassembly and installation of bottom parts : A. Disassemble lower hinge and screws. Then install them on the other side and consolidate the lower hinge. Note: the refrigerator-freezer incline angle less 45°. B. Swap over the position of the adjustable foot to the other side of the cabinet. 8. Move the hinge to another side of the box after removing the screws on the hinge; . 9. Install the hinge cover after fastening the hinge. C. Swap over the position of the lower door block to the other side. Install the screws and consolidate them. 5. Install the lower door and take care of its alignment with the appliance body. 6. Tighten the screws of the middle hinge on the reversible side. 7. Install the top door and remove the existing top door block. Install a new top door block . Screw it down. 11 10

1. Components that could be transferred from one side to the other directly after disassembling are

listed below: c pacd ne pot rood pot – overslip (2pcs) – top cover buckle (1pc) tfahs eg nih – sleeve (1 or 2pcs) – screws of top hinge (3 pcs) )cp 1( ylb m essa eg nih elddi m – )scp 2( eg nih elddi m fo s w ercs – tresni – nail (2 pcs) )scp 2( pac w ercs – )cp 1( rep pots rood – )cp 1( ylb m essa eg nih m ottob – )scp3( eg nih re w ol fo s w ercs – 2. The component that could be swapped over from one side to the other only after reconstruction is listed below: – top hinge assembly 3. Components that could be swapped over from one side to the other in pairs are listed below: – adjustable foot with internal thread (used with the lower hinge) – 4. Components that could not be reused temporarily are listed below : – left fridge door stop pots rood egdirf th gir – Note : Ensure the Appliance is unplugged and empty. Adjust the two leveling feet to their highest position. We recommend you have someone to assist you. . You should rest the Appliance on something solid e.g. a chair just below the top panel. . Maintenance FRIDGE DEFROSTING The fridge defrosting process is carried out automatically every time the compressor stops. The defrost water is automatically routed to the drain port and into a tray placed on the top of the compressor to the rear of the appliance from which it evaporates. Make sure the drain port on the fridge at the rear of the appliance is kept clear. FREEZER DEFROSTING Frost will accumulate inside the freezer depending upon the length of time during which the door is left open or the amount of moisture introduced. . This might allow air to penetrate the cabinet, thus encouraging continuous running of the compressor. Thin frost formation is quite soft and can be removed with a brush or plastic scraper. Do not use metal or sharp scrapers, mechanical devices or other means to accelerate the defrosting process. Remove all . . For the removal of heavy ice deposits disconnect the appliance from the mains supply and empty the contents into cardboard boxes and wrap in thick blankets or layers of paper to keep them cold. as quickly as possible. An increase in temperature of frozen food packages during defrosting will shorten the storage life. Provided that the contents are well wrapped and placed in a cool area, they should keep for several hours. Examine the contents when replacing them in the freezer and if some of the packages have thawed out. soda and then dry thoroughly. Wash all removable parts in the same way and reassemble. Reconnect the appliance to the mains supply and leave for 2 to 3 hours on setting number MAX before introducing the food back into the freezer and setting the thermostat to your normal setting. 13 12

NOISE FROM YOUR APPLIANCE

You may notice some rather unusual noises. The noises are caused by circulation of refrigerant in the cooling system. It has become more pronounced since the introduction of CFC free gases. This is not a . PROLONGED OFF PERIODS If the appliance is not in use for a long period of time, proceed as follows: 1. Disconnect from the mains supply. 2. Clean and dry the inside (see ‘Cleaning and maintenance’). 3. Leave the door open to prevent any unpleasant smells from building up while the appliance is not in use. NOTES FOR USE Do clean and defrost your appliance regularly. Do check contents of the compartments every so often. Do store commercially prepared food in accordance with the instructions given on the packets. Do choose high quality fresh food and be sure it is thoroughly clean before freezing it. Do wrap all food in food quality polythene bags or air tight containers and make sure any air is excluded. Do Not store poisonous or any dangerous substances in your freezer. It is designed for the freezing of . Do Not consume food which has been frozen for an excessive length of time. Do Not leave the door open for long periods, as this will make the appliance more costly to run and cause excessive ice formation. Do Not use sharp objects such as knives to remove the ice from the appliance. Only use a plastic scraper. Do Not put hot food into the appliance. Let it cool down to room temperature. may burst. Do Not give children ice-cream and water ices direct from the freezer as the low temperature may cause ‘freezer burns’ on the lips. Do Not try to keep frozen food which has thawed; it should be eaten within 24 hours or cooked and re-frozen. Changing the LED light The LED light of this appliance cannot be changed by user. Contact aftersale or repair service for replacement. Cleaning Troubleshooting 1. Unplug the appliance. 2. Remove all substances. 3. Clean the inside and outside walls with a clean sponge or soft cloth using .2 liters of water. 4. Rinse well and wipe dry with a clean soft cloth. If the appliance is not to be used for a long period of time then it is recommended avoiding unpleasant odors. Before calling for service please check the following. THE APPLIANCE IS NOT WORKING. Check the plug is inserted correctly into the mains socket. Check there is power to the mains socket by plugging another appliance in, if the other appliance do not work either, check the fuse in the plug. THE APPLIANCE IS NOISY WHEN OPERATING. Check the appliance is level and it is not in contact with another appliance or kitchen furniture. THE APPLIANCE DOES NOT COOL SUFFICIENTLY. If the door has been opened too often or it has been left open for a while it will take time for the appliance to reach its set temperature. . Check if a large quantity of fresh food has been introduced. 15 14 warm water or to remove all the

Removal devices household uses

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. Accessories Disposal Energy label FR/ENG manual Egg tray Left fridge door stop Sliding cover The refrigerating gas contained in the circuit of this appliance is isobutane (R600a); it causes a low . Please contact your local disposal department for advice on the correct method of disposal. 16

Instructions de sécurité

• Cet appareil peut être utilisé par des enfants âgés d’au moins 8 ans et par des personnes ayant des capacités physiques, sensorielles ou mentales réduites ou dénuées d’expérience ou de connaissance, s’ils (si elles) sont correctement surveillé(e) s ou si des instructions relatives à l’utilisation de l’appareil en toute sécurité leur ont été données et si les risques encourus ont été appréhendés. Les enfants ne doivent pas jouer avec l’appareil. Le nettoyage et l’entretien par l’usager ne doivent . • Si le cordon d’alimentation est endommagé, il doit être remplacé par le fabricant, son Service Après-Vente ou une . • Cet appareil est destiné à être utilisé dans des applications domestiques et analogues telles que: – les coins cuisines réservés au personnel des magasins, bureaux et autres environnements professionnels; – les fermes; – l’utilisation par les clients des hôtels, motels et autres environnements à caractère résidentiel; – les environnements de type chambres d’hôtes; • MISE EN GARDE: Maintenir dégagées les ouvertures de ventilation dans l’enceinte de l’appareil ou dans la structure d’encastrement. • MISE EN GARDE: Ne pas utiliser de dispositifs mécaniques ou autres moyens pour accélérer le processus de dégivrage autres que ceux recommandés par le fabricant. • MISE EN GARDE: Ne pas endommager le circuit de réfrigération. • MISE EN GARDE: Ne pas utiliser d’appareils électriques à l’intérieur du compartiment de stockage des denrées, à moins qu’ils ne soient du type recommandé par le fabricant. • Ne pas stocker dans cet appareil des substances explosives telles . • MISE EN GARDE: Remplir uniquement avec de l’eau potable. • En ce qui concerne les informations pour l'installation, la manipulation, l'entretien et le nettoyage de l'appareil, référez-vous aux paragraphes 《Installation》, 《Utilisation》《Entretien》et 《Nettoyage》 de la notice. Débrancher l'alimentation électrique avant toute opération. • • Attention: risque d’incendie • Pour la mise au rebut de l’appareil, se référer au chapitre usagés>. • Lampe non remplaçable par utilisateur. Contacter SAV en cas de dysfonctionnement. 3 2

Description de l’appareil

1. Thermostat réfrigérateur 2. Clayettes verre 3. Couvercle de bac à légumes 4. Bac à légumes 5. Tiroirs de congélation 6. Tiroir de congélation grand volume 7. Balconnets latéraux 8. Balconnet pour bouteilles 2L 9. Pieds ajustables REMARQUE: 5

ACHAT DE PRODUITS SURGELÉS

Cet appareil est un congélateur à 4 étoiles; il peut servir à congeler des produits frais et à conserver des produits surgelés. Lorsque vous achetez des produits surgelés, lisez les instructions de rangement . La durée maximale de conserv symbole à 4 étoiles: en général jusqu’à plusieurs mois, cependant cette durée varie en fonction de la nature des aliments à congeler. CONGÉLATION DE PRODUITS FRAIS pas la qualité des aliments en tant que telle. Ne mettez jamais au congélateur des aliments chauds, ni même tièdes. alimentaire; vous pouvez également le placer dans un sac plastique ou dans une boîte hermétique. Cela permet de prévenir la déshydratation des aliments, et d’éviter que les odeurs fortes de certains aliments ne se transfèrent sur d’autres. Pour congeler de la viande crue, enveloppez-la dans un sac plastique ou dans une boîte hermétique . La viande crue ne doit en aucun cas entrer en contact avec des aliments cuits. Pour des raisons de sécurité, ne congelez jamais de la viande crue pendant plus de deux ou trois jours. Les fruits et les légumes doivent être soigneusement lavés, puis placés dans le bac à légumes. Les liquides, notamment le lait, doivent être fermés hermétiquement et placés dans l’étagère à bouteilles située sur la porte. Remarque: La température interne du réfrigérateur dépend de la température des aliments frais qui y sont conservés ainsi que de la fréquence d’ouverture de la porte. Changez le réglage de température du thermostat si nécessaire. Inversion de porte CONSERVATION DE PRODUITS SURGELÉS Une fois achetés, tous les produits surgelés doivent être mis au congélateur le plus rapidement possible, avant d’avoir eu le temps de se décongeler et de se gâter. doivent toujours être respectées. Lors de la première utilisation du congélateur et après le dégivrage, mettez le thermostat sur le cran maximal au moins 2 heures avant de mettre les aliments, puis remettez-le en position normale. l’appareil sans les tiroirs du congélateur. FABRICATION DE GLAÇONS 1. Remplissez le bac à glaçons aux 3/4 avec de l’eau potable. 2. Mettez le bac dans le tiroir du haut. 3. Fermez la porte. Pour sortir les glaçons du bac: mettez-le sous le robinet pendant quelques instants puis tordez-le légèrement pour détacher les glaçons. Suivre les étapes suivantes pour inverser la porte de sa position initiale : 1. Enlever le cache charnière supérieur. Enlevez le cache de la charnière supérieure. 9 8

Enlever la charnière puis déposer avec soin la porte supérieure.

3. . Déposer la porte inférieure Enlever la butée de porte du bas et la repositionner de l’autre côté. 4. Démontage et remontage de la partie inférieure: A. . Remarque: le réfrigérateur ne doit pas s’incliner à plus de 45°. B. Permuter les pieds réglables. 8. . 9. Remettre le cache charnière. C. . 5. Reposer la porte inférieure en prenant soin de son alignement avec le corps de l’appareil. 6. Serrer les vis de la charnière intermédiaire. 7. Reposer la porte supérieure, enlever la butée existante et remettre l’autre butée fournie en . Enlevez les trois vis. 11 10

1. Les composants qui pourraient être transférés d’un côté à l’autre directement après que

démonter est énuméré au dessous: – la boucle de couvercle supérieur (1 pcs) – la manche d’arbre de gond (1 ou 2pcs) )cp 3( d nog rei m erp ed siv sel – )cp 1( d nog ed ueili m ud eélb m essa’l – )cp 2( ueili m ud d nog ed siv sel – )cp 2( uolc el rerésni – )cp 2( nohcuob el ressiv – )cp 1( etrop ed nohcuob el – )cp 1( erueiréfni d nog ed eélb m essa’l – )scp3( sab sulp d nog ed siv sel – 2. Le composant qui pourrait être sur remplacé d’un côté à l’autre seul après que reconstruction est énumérée : – la première assemblée de gond 3. Les composants qui pourrait être sur remplacé d’un côté à l’autre dans les paires sont énumérés au dessous : – )d nof ua érapér a( noluob el ceva elbatsuja deip el – . 4. Les éléments non réutilisés temporairement sont énumérés dessous : – butée gauche de la porte du compartiment réfrigérateur – butée droite de la porte du compartiment réfrigérateur Remarque : S’assurer que l’appareil soit débranché et vidé de son contenu. Ajuster les deux pieds nivelant à leur plus haut niveau. Nous recommandons de vous faire assister pour cette opération. Pour enlever la porte il est nécessaire de pencher l’appareil en arrière. Vous devriez reposer l’appareil sur quelque chose de solide par exemple, une chaise au niveau du panneau supérieur. Ne pas reposer l’appareil complètement à l’horizon pour éviter d’endommager le circuit de refroidissement. Entretien DÉGIVRAGE DU RÉFRIGÉRATEUR Le processus de dégivrage du réfrigérateur se déclenche automatiquement chaque fois que le compresseur s’arrête. L’eau de dégivrage est automatiquement dirigée vers le trou d’évacuation d’où elle s’écoule dans un bac placé sur le compresseur, derrière l’appareil, avant de s’évaporer. Assurez-vous que le trou d’évacuation du réfrigérateur, situé derrière l’appareil, reste bien dégagé en permanence. DÉGIVRAGE DU CONGÉLATEUR Le givre s’accumule dans le congélateur à une vitesse qui dépend de la durée d’ouverture de la porte, ainsi que de la quantité d’humidité qui y est introduite. Il est essentiel de faire en sorte que le givre ou la glace ne se forme pas à un endroit où ils pourraient compromettre l’étanchéité du joint de la porte. Cela aurait pour conséquence de permettre une entrée d’air constante, et donc de faire marcher le compresseur en permanence. grattoir en plastique. N’utilisez pas de grattoirs métalliques ou coupants, d’ustensiles mécaniques ou tout autre appareil pour accélérer le processus de dégivrage. Enlevez toutes les plaques de givre une fois décollées du plancher du congélateur. . Pour enlever les dépôts de glace épais, débranchez l’appareil, videz son contenu et placez-le dans des boîtes en carton que vous envelopperez dans des couvertures épaisses ou dans plusieurs couches de papier pour les garder au froid. . Pendant le dégivrage, toute hausse de température des aliments surgelés raccourcit leur durée de conservation. Si les aliments sont correctement emballés et placés dans un endroit frais, ils doivent pouvoir se conserver pendant plusieurs heures. assurer qu’ils n’ont pas été décongelés. 13 12

BRUIT DE L’APPAREIL

Vous remarquerez peut-être parfois des bruits inhabituels. Ces bruits sont dus à la circulation du réfrigérant dans le système de refroidissement. Le phénomène a tendance à s’accentuer depuis l’apparition des gaz sans CFC. . PÉRIODES D’INUTILISATION PROLONGÉE Si vous ne comptez pas utiliser l’appareil pendant un certain temps, procédez de la manière suivante : 1. Débranchez l’appareil. 2. Nettoyez l’intérieur, puis séchez (voir section ‘Nettoyage et entretien’). 3. n’est pas utilisé. REMARQUES CONCERNANT L’UTILISATION Cet appareil doit être régulièrement nettoyé et dégivré. . Les plats préparés doivent être conservés d’une manière conforme aux instructions des étiquettes. Choisissez des aliments frais de bonne qualité, et assurez-vous qu’ils sont bien propres avant de les congeler. Emballez tous les aliments dans des sacs pour aliment de qualité en polyéthylène ou dans des contenants hermétiques et assurez-vous qu’il n’y a pas d’air à l’intérieur. Ne conservez pas des substances toxiques ou dangereuses dans ce congélateur. Il est conçu pour la congélation des aliments comestibles uniquement. Évitez de consommer des aliments qui sont restés congelés pendant trop longtemps. Évitez de laisser la porte ouverte pendant trop longtemps: cela augmente la consommation d’électricité et entraîne une formation excessive de glace. N’utilisez jamais des objets pointus (ex: un couteau) pour enlever la glace de l’appareil. Utilisez toujours un grattoir en plastique. Ne mettez jamais des aliments chauds dans l’appareil. Laissez-les refroidir à température ambiante. Ne mettez jamais dans le congélateur des bouteilles remplies de liquide ou des boîtes scellées contenant des liquides gazeux, car elles pourraient éclater. Évitez de donner aux enfants des crèmes glacées ou des glaces à l’eau sortant juste du congélateur; . N’essayez pas de recongeler des produits décongelés ; consommez-les dans les 24 heures ou faites-les cuire avant de les recongeler. Changement de l’ampoule La lampe de cet appareil ne peut être changée par l’utilisateur. Contactez le service après-vente ou le centre de réparation pour la faire changer en cas de dysfonctionnement. Nettoyage Dépannage 1. Débranchez l’appareil. 2. Enlevez toutes les substances. 3. chaude ; vous pouvez également utiliser un mélange de 1 cuillère à café de bicarbonate de soude dans 1,2 litre d’eau . 4. . Si vous comptez laisser l’appareil inutilisé pendant une longue période, nous d’éviter la formation de mauvaises odeurs. . L’APPAREIL NE MARCHE PAS. . . L’APPAREIL FAIT BEAUCOUP DE BRUIT PENDANT QU’IL FONCTIONNE. meuble de la cuisine. L’APPAREIL N’EST PAS ASSEZ FROID. Si la porte est ouverte trop souvent ou si elle est restée ouverte pendant trop longtemps, il faut un peu de temps pour que l’appareil redescende à la température réglée. . Vous avez peut-être mis une trop grande quantité d’aliments frais dans l’appareil. Une fois le dégivrage terminé, lavez l’intérieur avec un mélange d’eau chaude et d’un peu de bicarbonate de soude, puis séchez soigneusement. Lavez de la même manière toutes les pièces amovibles, puis remettez-les en place. Rebranchez l’appareil et laissez-le fonctionner pendant 2 ou 3 heures sur le réglage MAX avant de remettre les aliments dans le congélateur et de remettre le thermostat sur le réglage habituel. 15 14 vous conseillons de le

Mise au rebut

Etiquette énergétique Notice d’utilisation en FR/EN Bac à œufs Butée de porte gauche Cache charnière supérieure Le gaz frigorigène contenu dans le circuit de cet appareil est de l’isobutane (R600a), gaz peu polluant . Veuillez contacter le service en charge de l’élimination des déchets de votre région pour obtenir des conseils sur la méthode de traitement appropriée. Enlèvement des appareils menagers usages La directive européenne 2012/19/EU sur les Déchets des Equipements Electriques et Electroniques (DEEE), exige que les appareils ménagers usages ne soient pas jetés dans le . Les appareils usagés doivent être collectés séparément réduire l’impact sur la santé humaine et l’environnement. Le symbole de la poubelle barrée est apposé sur tous les produits pour rappeler les obligations de collecte séparée. Les consommateurs devront contacter les autorités locales ou leur revendeur concernant la démarche à suivre pour l’enlèvement de leur vieil appareil. 16

Other Refrigerator Manuals