LG WK9 Simple Manual
Text of the manual
Smart Display with
the Google Assistant
www.lg.com
Copyright © 2019 LG Electronics Inc.
All Rights Reserved.
MFL70441307
1904_Rev01
ENGLISH
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 1
2019-04-19 2:25:30
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING:
yy To prevent fire or electric shock
hazard, do not expose this product
to rain or moisture.
yy Do not install this equipment in a confined
space such as a book case or similar unit.
yy This unit contains magnets which can
be harmful to some kind of object (Ex:
Magnetic card, Pacemaker etc..).
CAUTION:
yy Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions. Slots and
openings in the cabinet are provided for
ventilation and to ensure reliable operation
of the product and to protect it from over
heating. The openings should never be
blocked by placing the product on a bed,
sofa, rug or other similar surface. This
product shall not be placed in a built-in
installation such as a bookcase or rack
unless proper ventilation is provided or
the manufacturer’s instruction has been
adhered to.
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 2
2019-04-19 2:25:30
yy The apparatus should not be exposed
to water (dripping or splashing) and no
objects filled with liquids, such as vases,
should be placed on the apparatus.
yy No naked flame sources, such as lighted
candles, should be placed on the apparatus.
yy To avoid fire or electric shock, do not open the
unit. contact to qualified personnel only.
yy Do not leave the unit in a place near the
heating appliances or subject to direct
sunlight, moisture, or mechanical shock.
yy The Power Plug is the disconnecting
device. In case of an emergency, the Power
Plug must remain readily accessible.
yy To clean the unit, use a soft, dry cloth. If
the surfaces are extremely dirty, use a
soft cloth lightly moistened with a mild
detergent solution. Do not use strong
solvents such as alcohol, benzine, or
thinner, as these might damage the
surface of the unit.
yy Do not use volatile liquids such as
insecticide spray near the unit. Wiping with
strong pressure may damage the surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
yy Do not place the unit over the vehicle’s
air bag. When the air bag deploys, it may
result in injury. Before using in the car, fix
the unit.
yy Do not use the handsfree function while
driving the car.
yy Do not leave the unit on an unstable place
such as high shelves. it may fall down
because of the vibration of the sound.
yy Do not use high voltage products around this
product. (ex. Electrical swatter) This product
may malfunction due to electrical shock.
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 3
2019-04-19 2:25:30
CAUTION when using this product in
environments of low humidity.
yy It may cause static electricity in environments
of low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
NOTICE: For safety marking information
including product identification and supply
ratings, please refer to the main label on the
bottom or the other surface of the product.
For models using an adapter
Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
Declaration of Conformity
Hereby, LG Electronics declares that the
radio equipment type LG ThinQ View is in
compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
The use of the 5150 – 5350 MHz band is
restricted to indoor use only. This restriction
exists in the countries Belgium (BE), Bulgaria
(BG), Czech Republic (CZ), Denmark (DK),
Germany (DE), Estonia (EE), Ireland (IE),
Greece (EL), Spain (ES), France (FR), Croatia
(HR), Italy (IT), Cyprus (CY), Latvia (LV),
Lithuania (LT), Luxembourg (LU), Hungary
(HU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania
(RO), Slovenia (SI), Slovakia (SK), Finland
(FI), Sweden (SE), United Kingdom (UK),
Switzerland (CH), Iceland (IS), Liechtenstein
(LI) and Norway(NO).
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 4
2019-04-19 2:25:31
For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
Frequency range
Output power (Max.)
2402 to 2480 MHz
10 dBm
2412 to 2472 MHz
20 dBm
5180 to 5320 MHz
23 dBm
5500 to 5700 MHz
23 dBm
Symbols
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Disposal of your old appliance
1. This crossed-out wheeled bin symbol
indicates that waste electrical and
electronic products (WEEE) should be
disposed of separately from the municipal
waste stream.
2. Old electrical products can contain
hazardous substances so correct disposal
of your old appliance will help prevent
potential negative consequences for the
environment and human health. Your old
appliance may contain reusable parts that
could be used to repair other products,
and other valuable materials that can be
recycled to conserve limited resources.
3. You can take your appliance either to the
shop where you purchased the product,
or contact your local government waste
office for details of your nearest authorised
WEEE collection point. For the most up to
date information for your country please
see www.lg.com/global/recycling
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 5
2019-04-19 2:25:31
POWER: This unit operates on a mains
supply of 100-240 V~ 50-60 Hz.
Wiring: This unit is supplied with a BS 1363
approved main plug. When replacing the
fuse, always use a fuse of the same rating
approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer.
If the type of plug supplied is not suitable for
the mains sockets in your home, then the
plug should be removed and a suitable type
fitted. Please refer to the wiring instructions
below:
Warning: A mains plug removed from the
mains lead of this unit must be destroyed. A
mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect
either wire to the earth pin, marked with
the letter E or with the earth symbol 6 or
coloured green or green and yellow. If any
other plug is fitted, use same rating of fuse in
the plug.
Important: The wires in this mains lead are
coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this
unit may not correspond with the coloured
marking identifying the terminals in your
plug, proceed as follows: The wire which is
coloured blue must be connected to the
terminal which is marked with the letter N
or coloured black. The wire which is coloured
brown must be connected to the terminal
which is marked with the letter L or coloured
red.
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 6
2019-04-19 2:25:31
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CDROM for a charge covering
the cost of performing such distribution (such
as the cost of media, packaging and posting)
upon email request to [email protected].
This offer is valid for a period of three years
after our last shipment of this product. This
offer is valid to anyone in receipt of this
information.
For more information about Google’s open
source, visit device settings of Google Home
app.
Disclaimers
yy Google, Google Home, Google Play, Google
Duo, Chromecast built-in and other related
marks and logos are trademarks of Google
LLC.
yy The Google Assistant requires an internet/
data connection. Data rates may apply.
yy The Google Assistant is not available in
certain languages and countries.
yy Subscriptions may be required, and additional
terms, conditions and/or charges may apply.
yy Controlling certain devices and features
in your home requires a compatible smart
device.
yy Details of services may vary by country.
yy Please note that AI Service may be
changed, removed or terminated, without
notice, by LGE or its third-party providers.
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 7
2019-04-19 2:25:31
Step 1. Connect the AC
adapter
After connecting the AC adapter, the
Smart Display starts booting.
Then screen turns on
a LG booting logo appears on the
screen.
b Google Assistant logo appears on
the screen.
c Setup screen appears on the screen.
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 8
2019-04-19 2:25:31
Step 2. Install the Google
Home App
Download the Google Home App from
the Google Play or App Store.
Google Home
The Smart Display is not compatible
with the “Smart ThinQ” app. So it can
not be used for setup or for control by
using the “Smart ThinQ” app.
NOTE
Step 3. Set up the
Wi-Fi connection with app
a Connect your smart device to the
Wi-Fi network that you’ll use for
your Smart Display.
When using an iOS device, turn on
Bluetooth setting on your smart
device.
NOTE
b Launch the Google Home app.
c Follow the steps for Wi-Fi
connection on the app.
You will need a Google Account to use
this app.
NOTE
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 9
2019-04-19 2:25:32
d Smart Display is properly connected
to Wi-Fi, main screen will appear.
The Google Home app is provided by
Google. It might be revised by a change
of Google Policy.
NOTE
Getting help for the Google
Assistant
For more information and inquiries, please
refer to the below guide.
yy Visit the Google Assistant Help Center or
Google Product Forums on the web site.
yy Visit http://www.lg.com and then search
“WK9”.
Then follow these instructions.
[Support] [ [Help Library]
Site address is subject to change.
NOTE
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 10
2019-04-19 2:25:33
How to Use the
Google Assistant
Make sure the Smart Display is
connected to Wi-Fi. (Page 8-10)
Just start with “Hey Google” and
then ask it questions. Quickly manage
tasks, view glanceable answers, stay
connected with loved ones, enjoy your
entertainment, and control your smart
home -- all hands-free.
Say "Hey Google"
Hey Google
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 11
2019-04-19 2:25:33
yy Timers and alarms
“Set a timer for 15 minutes”
“Wake me up at 7 AM tomorrow”
yy Weather
“What’s the weather this weekend?”
yy Calendar and reminders
“What’s on my agenda?”
“Add doctor’s appointment to my
calendar”
yy Media
“Show me football highlights on YouTube”
“Show my playlists”
“Play the news”
yy Photos
“Show me my photos from two years ago”
“Show me my photos from Hawaii”
and more.
For more information on the voice
commands, refer to the Google Home app
screen.
NOTE
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 12
2019-04-19 2:25:33
Smart Home Control
With the Google Assistant, you can
control compatible smart home devices
such as TV’s, lights, switches, plugs,
thermostats and more by simply using
your voice.
Compatible LG appliance models:
Visit http://www.lg.com and then
search the information
NOTE
Make video calls
You can use Google Duo to make video
calls to your family and friends.
With Google Duo, you can enjoy video
calls between this unit and smartphones,
tablets, and computers with the Duo app.
If you need more information about
Google Duo, please contact Google or
visit the Google Duo Help Center.
NOTE
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 13
2019-04-19 2:25:33
Step 1. Connect the Wi-Fi
Make sure the Smart Display connects
to Wi-Fi by using the Google Home app
(Page 8-10).
The Bluetooth connection may not
work properly before connecting
to Wi-Fi.
NOTE
Step 2. Setup to be able to
pair with a Bluetooth device
on the Google Home app
You can set to be able to pair with a
Bluetooth device on the Google Home
app.
Follow these instructions on the Google
Home app.
[
] [ [ ] [ [Settings] [ [Paired
Bluetooth devices]
Paired Bluetooth
devices
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 14
2019-04-19 2:25:34
Step 3. Find and select your
Smart Display name on
setting of your device
Select Smart Display name that is set
on the Google Home app from phone’s
smart device list.
Smart
Display
name
WK9.DGBRLLK_SIM_ENG_MFL70441307.indd 15
2019-04-19 2:25:34
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap or
Microphone
Enable / Disable Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . Press
Camera
Enable / Disable Camera . . . . . . . . . . . . . . . . . . . . . . Slide Camera Switch.
Basic Operation
Microphone
Button
Camera
Switch
Camera
Microphone
Proximity/Ambient
light sensor
K9.DGBRLLK_SIM_ENG_MFL70441307.indd 16
2019-04-19 2:25:35