Ltech LT-905-OLED Manual 

Shortcut / Over load protection OLED display 8 bit / 16 bit www.ltech-led.com 2 kinds of DMX interfaces 1 Product Introduction: 6. With photoelectric isolation function. 7. With shortcut protection and over load protection, as well as warning function when fault. 8. With fast self-testing function. 9. 16bit / 8bit resolution optional. 10. Multiple dimming curve ( 0.1~9.9) optional. 5. With the operations can be completed via the RDM master console, such as parameters browsing & setting, DMX address setting, equipment recognition, etc. RDM remote management protocol, 4. Support 2 kinds of DMX ports with signal isolation function: 5-pin XLR, RJ45. 2. Easy operation with OLED screen and the touch buttons. 1. Designed with 5 channels output, and Max. 5A current per channel, up to 600W output power. 3. 5 kinds of mode optional: single color, color temperature, RGB, RGBW, RGBWY. www.ltech-led.com

5-pin XLR, RJ45 -30℃~65℃ L122×W110×H37mm L125×W115×H39mm 450g 12 24Vdc 5A x 5CH Max. 25A (0~60W...120W) Dimming/CT/RGB/RGBW/RGBWY 0.1~9.9 8bit (256 levels) / 16bit (65536 levels) Yes Shortcut / Over load Model Input Signal Input Voltage Current Load : : : Photoelectric Isolation : Protection: Working Temperature : : : : : : Output Power : DMX Interface : Control Mode : Dimming Curve : Grey Level Dimensions Package Size Weight (G.W.) Product Size: The Unit: mm www.ltech-led.com www.ltech-led.com 3 2

OLED screen RJ45 5-pin XLR DMX/RDM input & output DMX/RDM input & output Power indicator Signal indicator 12-24Vdc Power input Green terminals LED lamps connection OLED Screen Interface: Main page 1. DMX Address Setting Press "M" key, switch entries. Press "∧" or “∨" key, parameter adjustment. Long press “M” key, back to main page. Exit: back to previous page. 2. PWM Frequency Press “∧" or “∨" key to set DMX address. Range: 1~512 Press “∧" or “∨" key to switch frequency. Optional: High Std (standard) Mid (middle) Low DMX: Hz: High Mode: RGB 8bit Curve: Standard TOOL&v TEST&v 001 DMX: 001 Hz: Mode: RGB 8bit Curve: Standard TOOL&v TEST&v High M < <

Press “∧" or “∨" key to switch dimming curve. Optional : Standard Linear 0.1~9.9 4. Resolution Press “ 8bit 16bit ∧" or “∨" key to switch resolution. Optional : DMX: 001 Hz: High Mode: RGB Curve: Standard TOOL&v TEST&v 8bit DMX: 001 Hz: High Mode: RGB 8bit Curve: TOOL&v TEST&v Standard 6. Tool Press “∧" or “∨" key to enter submenu. EXIT (Press ∨" key) " Screen lock: set Lock: ON, screen will be locked if unmanned operation for 2 min, press "M" key for 3s to unlock. DMX: 001 Hz: High Mode: RGB 8bit Curve: Standard TEST&v TOOL&v Screen: ON+Addr Contrast: 40% Buzzer: ON Lock: OFF EXIT&v Press M for 3s 7. Test Press “∧" or “∨" key to enter submenu. EXIT (Press ∨" key) " * Fast self-testing function: press “ or " keys simultaneously for 2-3 seconds under any page, decoder will enter self-testing function. ∧" ∨" DMX: 001 Hz: High Mode: RGB 8bit Curve: Standard TOOL&v TEST&v Brightness setting (range: 0~255) CH1: 255 CH2: 255 CH3: 255 CH4: 255 CH5: 255 ALL: 255 EXIT &V 3. Mode DMX: 001 Hz: High Mode: 8bit Curve: Standard TOOL&v TEST&v RGB Press “ Dim CT RGB RGBW RGBWY ∧" or “∨" key to switch mode. Optional :