Logitech SLIM COMBO Setup Manual

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . 7 Français . . . . . . . . . . . . . . . . . . . . . . . . . 11 Italiano . . . . . . . . . . . . . . . . . . . . . . . . . 15 Español . . . . . . . . . . . . . . . . . . . . . . . . . 19 Português . . . . . . . . . . . . . . . . . . . . . . . .23 Nederlands . . . . . . . . . . . . . . . . . . . . . . . 27 Svenska . . . . . . . . . . . . . . . . . . . . . . . . . 31 Dansk . . . . . . . . . . . . . . . . . . . . . . . . . .35 Norsk . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Suomi . . . . . . . . . . . . . . . . . . . . . . . . . .43 Ελληνικά . . . . . . . . . . . . . . . . . . . . . . . . . 47 По-русски . . . . . . . . . . . . . . . . . . . . . . . . 51 Po polsku . . . . . . . . . . . . . . . . . . . . . . . . 55 Magyar . . . . . . . . . . . . . . . . . . . . . . . . . 59 Česká verze . . . . . . . . . . . . . . . . . . . . . . .63 Slovenčina . . . . . . . . . . . . . . . . . . . . . . . .67 Türkçe . . . . . . . . . . . . . . . . . . . . . . . . . . 71 75 . . . . . . . . . . . . . . . . . . . . . . . . . . العربية 79 . . . . . . . . . . . . . . . . . . . . . . . . . . עברית

Holder of iPad Microphone hole Any Angle stand Magnetic spine to connect iPad Keyboard LED Shortcut keys Keyboard Keyboard power button Micro USB charging port iPad volume up/down iPad power button Holder for stylus or digital pencil SLIM COMBO Setup guide English

1. Insert iPad into iPad holder, and press down until it clicks into place. Make sure the camera and microphone match up to the openings on the iPad holder. 2. If you have a stylus or digital pencil, slide it into the holder on the side of the case. ESTABLISHING THE CONNECTION To pair your keyboard case with your iPad: 1. Switch on the power button. If the LED status light is red, charge the keyboard. 2. On your iPad, make sure Bluetooth® is on. – Select Settings > Bluetooth > On. – Select “iPad” from the Devices menu. 3. Press the Bluetooth® connect button on the keyboard for 2 seconds until the status light blinks. The keyboard is discoverable for 3 minutes. 4. If your iPad requests a PIN, enter it using the keyboard (not on the iPad), then press ENTER. 5. When a successful connection is made, the status light stays on for a short time, then turns of. FOUR VERSATILE MODES 1. Typing mode Pull out the stand on the back of the iPad holder to the desired angle. Attach the keyboard, and place the iPad case on a fat surface to start typing. 2. Viewing mode Detach the keyboard. Pull out the stand on the back of the iPad holder to the desired angle. 4. Reading mode Detach the keyboard. Close the stand on the back of the iPad holder, and hold in portrait orientation for the optimum reading position. 3. Studio mode Detach the keyboard. Pull out the stand on the back of the iPad holder until the iPad is in a comfortable drawing position. 2s ON 20-70° English

1. To detach your iPad from the case, lay it on a fat surface. 2. Press down on one corner of the iPad holder to release one side of the iPad; repeat on the opposite corner. 3. Lift the iPad from the bottom to release it from the case. SHORTCUT KEYS LED LIGHT INDICATORS LED Behavior Status Blinking green Battery is charging Solid green Battery is fully charged (100%) Red Battery level is low (less than 10%), recharge the battery Blinking white Fast: Keyboard is in discovery mode, ready for pairing Slow: Keyboard is trying to reconnect to iPad Solid white Bluetooth® pairing or reconnection is successful ctrl shift Home Switch language Keyboard brightness down Keyboard brightness up Search Virtual keyboard Previous track Play/ pause Next track Mute Volume down Volume up Bluetooth Battery check Lock screen English