Mitsubishi Electric Melservo MR-J5 G Series Operation & User’s Manual

Mitsubishi Electric Corporation cannot be held responsible for any problems caused by unauthorized access. Functions Detailed functions Description Supported firmware version Detailed explanation  Alarm history This function saves information of the alarm that occurred in the servo amplifier. The information is saved in chronological order and used for occasions such as analyzing the cause of the alarm. A0 Refer to "Alarm ...

25 2 Operation function Functions Detailed functions Description Supported firmware version Detailed explanation Stop function Quick Stop This function stops the servo motor with a specified method and switches to the servo-off status. A0 Refer to "Quick stop" in the following manual. MR-J5 User's Manual (Function) Halt This function stops the servo motor while the servo-on status is maintained. A0 Refer to "Halt" in the following manual. MR-J5 User's Manual (Function) Stroke limit function This function uses LSP (Forward rotation stroke end) and LSN (Rever ...

21 1 1.7 Special specifications Servo amplifiers without the dynamic brake (-ED/-RU) Summary This section describes the servo amplifiers without the dynamic brake. Items not described in this section are the same as the MR-J5-_G(-RJ) and MR-J5W_-_G. Specifications The built-in dynamic brakes of the servo amplifiers with capacity of 7 kW or less are removed. Take safety measures such as providing an extra circuit in case of an emergency stop, alarm, and servo motor stop at power supply shut-off. When the following servo motors are being used, the el ...

All other product names and company names are trademarks or registered trademarks of their respective companies. SH(NA)- 030294ENG- C ...