Mercia Garden Products 0619LOG005-V4 General Instructions Manual

23b 25 25 25 Pre drill hole 70mm screw 20 20 20 a b Step 12 Parts needed - No. 20 QTY 3 Align the Roof Purlin(s) (No. 20) into the cut out slots on each gable top ensuring purlin interlocks the boards. Secure the purlins at each end by screwing through the bars into the boards (ensure to pre-drill to avoid the boards splitting) using 4x70mm screws per purlin. *Please note: The gable shown is for illustrative purposes and may difer in width from your choice in product. Nevertheless, despite any diferences the process of fxin ...

Step 3 Parts Needed - No. 33 QTY 12 No. 34 QTY 2 No. 35 QTY 6 No. 36 QTY 6 Following the method outlined previously (see main instructions) continue placing the boards (No’s. 33, 34, 35 & 36 ) on to the veranda sides, ensuring to interlock the boards. *Board 33 are the last boards to ft on to the assembly. 36 35 33 33 37 37 Step 4 Parts Needed - No. 31 QTY 25 Following the method outlined previously (see main instructions) p ...

- ment immediately after the building has been assembled. P 14 Please retain product label and instructions for future reference ...

HANDLE WITH CARE 1 2 3 4 Felt tacks Step 18 Parts needed - No. 38 Cut the felt into fve strips and lay onto the roof in the order shown in the illustration. *Ensure there is approximately 50mm of overhanging felt each side. Once the felt is laid out fx to the roof using felt tacks at 100mm intervals. *Felt size: 3030mm 240x Felt Tacks 1. 2. 3. 4. 5. Closure Trim Internal 23 *Measure and cut the closure trims to ft the internal space. 23 23 Closure Trim Internal 27 *Measure and cut the closure trims to ft the internal space. ...

Step 9 Parts Needed - No. 8 QTY 1 No. 19 QTY 1 Following the same method outlined in Pre-Assembly, lay the next two boards (No’s. 8 & 19) onto the front of the assembly. Step 11 Parts Needed - No. 3 QTY 2 Place the gable tops (No. 3) onto the assembly. Fix into position by screwing through the notches as shown in the illustration. *Ensure that the boards are level and fush with each other as you lay each one. 4x70mm Screws Pre drill hole 70mm screw 8 17 18 3 3 19 Step 10 Parts Needed - No. ...

Depth = 2928mm (Without Veranda) 3400mm (With Veranda) Height = 2641mm Base Dimensions: Width = 3118mm Depth = 2345mm (Without Veranda) 3203mm (With Veranda) Please retain product label and instructions for future reference Before assembly please make sure you have a suitable base ready to erect your building MADE IN GREAT BRITAIN Starter Board - 66x19x3296mm QTY 2 LB19RT66-A-3296 Log Board - 120x19x1402mm QTY 6 LB19-B-1402 Log Board - 120x19x326mm QTY 30 LB19-B-326 Log Board - 120x1 ...

Step 9 Parts Needed - No. 8 QTY 1 No. 19 QTY 1 Following the same method outlined in Pre-Assembly, lay the next two boards (No’s. 8 & 19) onto the front of the assembly. Step 11 Parts Needed - No. 3 QTY 2 Place the gable tops (No. 3) onto the assembly. Fix into position by screwing through the notches as shown in the illustration. *Ensure that the boards are level and fush with each other as you lay each one. 4x70mm Screws Pre drill hole 70mm screw 8 17 18 3 3 19 Step 10 Parts Needed - No. ...