Mec Empower Broadband Calix GigaCenter Quick Start Manual

6781 6.0” (15.2 cm) 2.0” (5.1 cm) 3.0” (7.6 cm) 3.0” (7.6 cm) 3.5” (8.9 cm) 4.125” (10.5 cm) 5.0” (12.7 cm) 3.25” (8.3 cm) † † = Standard Electrical Outlet Spacing Note: Mounting holes with double right indicate standard Structured Wiring Enclosure Spacing (Levithon) Connecting the Equipment 1. Remove the GigaCenter from its packaging and inventory all parts. 2. Remove the fi ber access cover and set aside temporarily. 3. Plug in the power adapter to an available wall socket and attach the other end to the GigaCenter’s power port. 4. Attach the fi ber pigta ...

a. From the GigaConnect dashboard, click on the “Wireless” icon: b. From the “Wireless” column on the left under “2.4G Network,” click “SSID Setup.” c. Change the default “SSID (Network Name)” by typing the name you desire into the “Rename SSID” field, then click the “Apply” button. d. To change the wireless password, from the “Wireless” column on the left under “2.4G Network,” click “Security.” e. Click the circle adjacent to “Use Custom Security Key,” type in the desired new security key, an ...

a. Click the “Advanced” icon from the dashboard, or the “Advanced” button on the blue line near the top of the screen. Or b. In the left column, click “Security, then click “Firewall.” ...

a. Connect an Ethernet cable between your computer and the Ethernet “1” port on your Gigacenter. b. From your browser, access the GigaCenter at http://192.168.1.1 c. The following window should appear. If you receive a security warning, click on “Advanced” and choose to access the GigaCenter. d. Login using the user [admin] and the password listed on the Default Settings label on your GigaCenter, then click the “Login” button. ...

a. Click the “Advanced” icon from the dashboard, or the “Advanced” button on the blue line near the top of the screen. Or b. In the left column, click “Security, then click “Firewall.” ...

a. Click the “Advanced” icon from the dashboard, or the “Advanced” button on the blue line near the top of the screen. Or b. In the left column, click “Security, then click “Port Forwarding.” c. Click “Add,” key in the port forwarding rule parameters, then click “Apply.” d. Add additional port forwarding rules as desired. ...