Mastervolt MasterBus Power Interrupter Operation & User’s Manual

BETRIEBSANLEITUNG / MANUEL D’UTILISATION MANUAL DE UTILIZACION / INSTRUZIONI PER L’USO MasterBus Power Interrupter Switch off (part of) MasterBus network for power saving MASTERVOLT Snijdersbergweg 93, 1105 AN Amsterdam The Netherlands Tel.: +31-20-3422100 Fax.: +31-20-6971006 www.Mastervolt.com Copyright © 2015 Mastervolt v 1.0 May 2015 ENGLISH: PAGE 1

1 GENERAL INFORMATION 1.1 Use of this manual Copyright © 2015 Mastervolt. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Mastervolt is prohibited. This manual serves as a guideline for the safe and effective operation of the MasterBus Power Interrupter. Keep this manual at a secure place! 1.2 Guarantee specifications Mastervolt guarantees that this product was built according to the legally applicable standards and stipulations. If you fail to act in accordance with the regulations, instructions and stipulations in this user’s manual, damage can occur and/or the product will not fulfil the specifications. This may mean that the guarantee will become null and void. The standard guarantee period is two years after date of purchase. 1.3 Liability Mastervolt can accept no liability for:  consequential damage due to use of the MasterBus Power Interrupter;  possible errors in the manuals and their results;  Use that is inconsistent with the purpose of the product. CAUTION! Never remove the identification label. 2 FUNCTION The MasterBus Power Interrupter is designed to switch off (part of) the MasterBus network to reduce power drain from, for instance, a battery. An internal relay (dis)connects MasterBus power between the two MasterBus connectors. The MasterBus Power Interrupter operation is entirely MasterBus based. See www.mastervolt.com for information about MasterBus and the MasterBus event structure. The table below shows the functions. Monitoring Description Default Range State Part of MasterBus network can be switched on (Activated) or off (Standby). Read only. Activated Activated/ Standby Control Button to change the State. Activated Activated/ Standby Configuration General Language Set the MasterBus Power Interrupter menu language English See specifications Device name Any name you wish with 12 characters max Depowering 12 characters max Events locked Check box for installers to lock event configuration. Only operable by installers. Unchecked Unchecked/ Checked Configuration Startup Startup Select condition at Startup. On On/ Off/ Last Event commands Activate The MasterBus Power Interrupter can be switched on (Activated) or off (Standby) with this Event command. - - MPC stop Do not use. - - MPC reduce Do not use. - -

3 3 INSTALLATION 3.1 Overview Insert the MasterBus cables, see below. Functional scheme of the MasterBus Power Interrupter. 3.2 Operation. One (free choice) of the MasterBus connectors should be connected to a MasterBus powering device, like a MasterBus USB Interface or Mass Charger, with a MasterBus cable. The other MasterBus connector should be connected to a non-powering device like a MasterView Easy display. You will then be able to disconnect the MasterView Easy display from MasterBus power. Every non-powering MasterBus device will be disconnected from MasterBus power attached to this connection. The default start-up configuration is “On”. This means that MasterBus Power is available (switched on) in a start-up situation. This setting can be changed to “Off” or “Last” in the configuration page of MasterBus. Use “Last” if you want the MasterBus Power Interrupter to remember the last state in a start-up situation. The MasterBus Power Interrupter can be used to make a segregation between powering and non- powering devices on a MasterBus network. By doing so, you can manually switch the MasterBus Power off by changing the device state to standby using the control button in the monitoring page of MasterBus. Events are available to change the device state automatically. MasterBus Power (non-powering devices) can be switched off (Standby) when, for instance, a low battery situation is detected in a MasterShunt or Mass Combi. 1. Communication LED, illuminating when the state is “Activated” MasterBus connector Function: “Standby”: Relay is open  Switched off MasterBus Power. “Activated”: Relay is closed  Switched on Masterbus Power.

Article number: 77031550 Delivery also includes: MasterBus cable, MasterBus Terminating device, User’s manual Function of instrument: Switching off (part of) MasterBus network for power saving Languages available: English Power consumption: 132 mW MasterBus Powering: No Din rail mounting: Yes, Din rail 30 mm [1.2 inch] Protection degree: IP 21 Dimensions: 66 x 78 x 32 mm [2.6 x 3.1 x 1.3 inch]; see drawing below Weight: Approx. 80 gr [0.18 lb] = MasterBus connector Dimensions in mm (inch) and connections 4,5 [0.18] 69 [2.7] 4.0 [0.16] 33 [1.3] 33 [1.3] 6.0 [0.24] 78 [3.1] 32 [1.3] 4.0 [0.16] Snijdersbergweg 93, 1105 AN Amsterdam, The Netherlands Tel : + 31-20-3422100 Fax : + 31-20-6971006 Email : [email protected]