Q-Optics Radiant Manual 

Welcome to Q-Optics Radiant™ Light System Headlight Headlight style may vary Anti-Curing Filter Shirt Clip Spiral Wrap Battery Pack model #RADBL25 Power Supply model #FY0503000 5V - 2.5A DC power supply

which features an ergonomic and easy to understand control panel integrated with the battery pack. Note the location and function of the interface and controls shown below. System Assembly Assembling the Radiant Light System is quick and easy. For use, simply insert the headlight interface into the top of the battery pack. For charging the battery pack, simply plug the power supply cord interface into the charger interface on the bottom of the unit as shown. Headlight Belt Clip Headlight connection interface Power supply connection interface Intensity up On/Off Battery Status Intensity down Power Supply

Battery Pack Operation Operating the system is simple and intuitive by way of visual indication, which occur upon pressing a control button. Pressing the increase/decrease intensity buttons will be accompanied by a visual LED display of the current light level (1-10). Suggestions Longer battery life – Decrease intensity to increase battery life. Anti-curing – Use included anti-curing fi lter or decrease intensity to prevent fast curing of composite material. Increase intensity button: 10 positions, LED display indicates current light level. Will also turn on headlight if it is currently off *. On/Off button: Turns the headlight on and indicates current light level using LED display, or turns the headlight off *. Decrease intensity button: 10 positions, LED display indicates current light level. Will also turn on headlight if it is currently off *. Battery Status button: LED display indicates current battery level. Battery LED indicates battery status. GREEN - Battery can run headlight. RED - Battery needs charging - headlight may not turn on. Battery LED LED display Become familiar with the safety symbols presented in this section. These symbols will alert you to safety hazards and conditions that may result in personal injury, death, or property and equipment damage. WARNING: Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Risk of electrical shock. Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Disconnect equipment from line voltage. Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Risk of explosion or fire. Fire, open flames, and smoking prohibited. WARNING: Wear protective clothing, safety bols ols presented in this to safety hazards onal injury, death, or rve this warning may h, or equipment al shock. Failure to sult in personal amage. ipment from line his warning may h, or equipment on or fire. Fire, open ted. e clothing, safety ratory protection. t in serious injury. s. Wear y goggles with side gloves depending Warnings • Do not disassemble battery pack • Do not dispose of battery pack in fi re • Do not heat battery pack above 60 o Celsius (140 o Fahrenheit) Low Battery Warning: If the headlight is on it will toggle from bright to dim for about 1 second four or fi ve times to indicate a critical battery, charge battery. The Battery LED will fl ash red every four seconds to indicate a critical battery, charge battery. * Headlight will only turn on if fully plugged in.

1 p g, y goggles, and approved respiratory protection. Failure to observe may result in serious injury. WARNING: Hot! Risk of burns. Wear heat-protective clothing, safety goggles with side shields and/or heat-protective gloves depending on the symbol shown. WARNING: System or material pressurized. Relieve pressure. Failure to observe this warning may result in serious injury or death. m rge completed GREEN Capacity erial pressurized. observe this s injury or death. Become familiar with the safety symbols presented in this section. These symbols will alert you to safety hazards and conditions that may result in personal injury, death, or property and equipment damage. WARNING: Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Risk of electrical shock. Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Disconnect equipment from line voltage. Failure to observe this warning may result in personal injury, death, or equipment damage. WARNING: Risk of explosion or fire. Fire, open flames, and smoking prohibited. WARNING: Wear protective clothing, safety goggles, and approved respiratory protection. Failure to observe may result in serious injury. WARNING: Hot! Risk of burns. Wear heat-protective clothing, safety goggles with side shields and/or heat-protective gloves depending on the symbol shown. 1. Safety Symbols RED RED Green Voltage {V} Charge voltage Charging Diagram Warning • Headlight heats up during use Touch with Caution Headlight The Q-Optics Radiant™ Light System Headlight mounts easily via the “Quick Connect Mount” enabling use with the Q-Optics Headband, most brands custom TTL style loupes, most brands fl ip style loupes, eyeglasses, and safety glasses. Attach mounting clip (if necessary) using instructions included with clip. Headbands and some loupes come with clip already mounted. Remove name plate (if necessary) by pressing upward from the bottom and off to reveal the mounting screws as shown above. Mounting clip styles will vary. Attach the headlight by sliding the quick disconnect onto the mounting screws as shown. Install spiral wrap using instructions included with clips. For headbands use the clips on the side of the band. Attach the headlight cable to the side clips. Install anti-curing fi lter using the steps below. Connect headlight cable to battery pack and enjoy your Q-Optics Radiant™ Light System. 1. Align fi lter with front of headlight as shown. Attach shirt clip to headlight cable. Connect clip to the desired position on your clothing to keep cable out of your work area. Snap clip onto headlight cable 1. Safety Symbo RED RED Install spiral wrap using instructions included Install anti-curing fi lter using the steps below. 1. Align fi lter with front of headlight as shown. 2. Snap fi lter onto front of headlight.

Power supply styles and indicator light position will vary. 1. Plug power supply into bottom of the battery pack. 2. Plug power supply into electrical outlet. 3. Battery LED will be RED to indicate battery is charging. LED display will pulse to indicate current level of battery. When Battery LED is no longer RED battery is fully charged. GREEN Light – Indicates power supply is on. Does NOT indicate charge status. Using the Power Supply MODEL# FY0503000 READ THESE INSTRUCTIONS BEFORE USING POWER SUPPLY Power Supply Power Supply