Reece Wolfen 9505996 Installation Manual

9505997 Wolfen Folding Shower Seat 960mm Installation Details | Warranty

Designed for absolute performance, Wolfen’s shower seats set new standards in quality and durability. With 316 grade stainless steel coach screw fi xings, the shower seat has a convenient foldaway design and is made from UV stabilised HDPE.

White Shower Seat Stainless Steel Legs White Shower Seat Finish Brushed Legs Brushed Legs Material 304 Grade Stainless Steel UV stabilised HDPE Shower Seat 316 Grade Stainless Steel Screws 304 Grade Stainless Steel UV stabilised HDPE Shower Seat 316 Grade Stainless Steel Screws Maximum Load Rating 472kg 472kg TECHNICAL INFORMATION Wolfen Folding Shower Seat 960mm Wolfen Folding Shower Seat 600mm

WOLFEN INSTALLATION MANUAL | Installation Instructions TECHNICAL INFORMATION Wolfen Folding Shower Seat 960mm 9505997 Wolfen Folding Shower Seat 600mm 9505996 400 480 411 25*25*1.5 600 360 4-R12 125 350 6 400 40 360 94 784.5 600 25*25*1.5 25*25*1.5 220 centres 170 of foor 475 centres 400 480 411 25*25*1.5 960 360 4-R12 125 710 6 400 40 360 94 784.5 960 25*25*1.5 25*25*1.5 170 of foor 830 centres 220 centres

below instructions may result in serious injury. The 960mm shower seat meets AS 1428.1-2009 and both seats are manufactured from high quality stainless steel with a HDPE seat. It has been tested to a loading of 1100N. Proper care must be taken to install the grab bar to an appropriate load bearing base, using appropriate fixing bolts. Installation Instructions: Shower seats are specifi cally designed for comfort and stability while showering and drying off. They can be mounted anywhere within the bathroom provided the location has been planned with a supporting in-wall mounting structure. The seats are designed for the user to bathe safely. 1. Confi rm the contents of the box. The box should contain 1 shower seat frame and 4 screws. 2. Test the up and down movement of the seat, then set it down and consider the following installations: • When selecting the mounting location, install only where there is proper structure support within the wall. Measure the area of the seat on the wall to avoid penetrating objects behind the wall. • The seat must be fl at (and not angled to one side) when installed. Use a levelling tool when adjusting the height of each leg. 3. After completing fi nal adjustments, position the mounting legs close to the shower wall and mark each hole location for drilling. 4. Drill the pilot holes. 5. Install the shower seat with the screws provided. Inspect each screw to ensure it is tight. 6. Test the seat by applying gradual pressure. Maintenance Clean product with mild soap and water.

WOLFEN INSTALLATION MANUAL | Warranty V1 REECE PRODUCT QUALITY GUARANTEE You have purchased a quality product from Reece Australia Pty Ltd ABN 84 004 097 090 (“Reece”). This product is covered by a 5 year replacement product warranty and a 12 month warranty over spare parts and labour. 5 YEAR WARRANTY This warranty covers faults in the product construction, material and assembly. Products which are within 5 years from the date of purchase, found upon inspection by an authorised Reece representative, to be defective in construction, material or assembly, will be repaired or exchanged with an equivalent product free of charge. Replaced items become Reece’s property. All replacement products will be available for collection without charge to the customer at the nearest Reece branch to the customer’s location, or elsewhere as agreed between the customer and Reece. Labour and Spare Parts The labour for the replacement of products and spare parts to which this warranty applies will be supplied by Reece or relevant supplier using licensed plumbers engaged by Reece or relevant supplier within 1 year from the date of purchase. Spare parts other than those listed in the Manufacturer’s Provisions above, which are within 1 year from the date of purchase found upon inspection by an authorised Reece representative to be defective in construction, material or assembly, will be replaced free of charge. Warranty Conditions This warranty will apply only under all of the following conditions: • The item has been installed by a licensed plumber • Failure is due to a fault in the manufacture of the product • Proof of purchase (including the date of purchase) is provided • The installation of the product is in accordance with the instructions provided This warranty does not cover products purchased as an ex-display without being fully checked and tested for sale by the manufacturer. This warranty does not include faults caused by: • Unsuitable or improper use • Incorrect installation or installation not in accordance with the instructions provided • Installation or part installation by the purchaser or any person other than a LICENSED PLUMBER • Normal wear and tear • Inadequate or complete lack of maintenance • Chemical, electrochemical or electrical infl uences • Harsh detergents or abrasive cleaners used on product fi nishes EXCLUSIONS To the fullest extent permitted by law, Reece excludes all liability for damage or injury to any person, damage to any property, and any indirect consequential or other loss or damage. CLAIM PROCEDURE For all warranty queries customers are to contact the branch where the product was purchased. These details can be found on your purchase invoice. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Don’t risk it, use a licensed plumber.™ products purchased 5 YEAR Q U A L I T Y G U A R A N T E E

INSTALLATION INSTRUCTIONS AND IMPORTANT INFORMATION, THE PROBLEM HAS NOT BEEN IDENTIFIED, PLEASE CONTACT YOUR LOCAL REECE STORE ON: 1800 032 566