birddog PTZ KEYBOARD Operation & User’s Manual

• Select Yes to start the search • A list of discovered cameras will appear showing the cameras that have been discovered. Scroll through the discovered cameras using the Zoom Speed dial • To add a camera to be controlled by the Keyboard, press the ADD button • With the cursor on CAM ID, Assign the camera to a CAM ID by rotating the Zoom Speed dial • Click the Zoom Speed dial to save • Move the cursor to the Title, and use the alphanumeric keypad to give the camera a title • Click the Zoom Speed dial to save • Enter the username for the camera ...

Engaging the Camera OSD Menu for non-IP cameras 1. Press the Menu button on the keyboard to send a com- mand to the camera to engage the OSD menu 2. Navigate the menu by using the joystick a. Move up / down to navigate through menu options b. Move the joystick to the right to send an “enter” command c. Move up / down to adjust values d. Move the joystick to the left to send an “exit” com- mand Engaging the Camera OSD Menu for PELCO-D or ONVIF-IP Cameras • On the alphanumeric keypad, call preset 95 to engage the menu (type 95, and then press the “Call” butt ...

Firmware Version of the unit. KBD SETTING MENU IP CONFIGURATION BUTTON LIGHT ASSIGNED KEY: F1 FACTORY DEFAULT GPI I/O PASSWORD SETTING JOISTICK ZOOM: ON MODEL INFO EXIT MODEL INFO MENU IP ADDRESS: 192.168.0.100 FW VERSION: X.X.X EXIT How to assign camera Manually adding cameras The keyboard can store settings to control up to: • 255 cameras by RS485 PELCO protocol separately • 7 cameras by VISCA via RS422 group A separately • 7 cameras by VISCA via RS422 group B separately • 255 cameras by ...

4. The selected CAMERA button will flash in red and yellow alternately. • If two or more numbers are received from the TALLY/ CONTACT connector, CAMERA buttons which are not selected will light in red. You can select a camera by pressing its respective CAM- ERA button (lit in red). • The tally lamp of the camera receiving a com- mand from the TALLY/CONTACT connector lights. * • On Air - Displays the tally input lamp corre- sponding to the number of the camera with tally input ON. • ON AIR TALLY mode: The following actions are per- formed fo ...

4. The selected CAMERA button will flash in red and yellow alternately. • If two or more numbers are received from the TALLY/ CONTACT connector, CAMERA buttons which are not selected will light in red. You can select a camera by pressing its respective CAM- ERA button (lit in red). • The tally lamp of the camera receiving a com- mand from the TALLY/CONTACT connector lights. * • On Air - Displays the tally input lamp corre- sponding to the number of the camera with tally input ON. • ON AIR TALLY mode: The following actions are per- formed fo ...