Ceragon FibeAir IP-20 All-Outdoor Series Operation & User’s Manual

Page 553 of 825 Ceragon Proprietary and Confidential The following is a partial sample output of the modem pm-xpi show interval 24hr command: radio [2/1]>modem pm-xpi show interval 24hr Modem XPI PM Table: =================== Interval Integrity Min XPI (dB) Max XPI (dB) XPI below threshold seconds =============================================================== 1 1 55.00 0.00 0 ...

Page 485 of 825 Ceragon Proprietary and Confidential 14.5 Configuring XPIC (CLI) Note: This option is only relevant for IP-20C and IP-20C-HP units. This section explains how to configure XPIC and includes the following topics: • XPIC Overview (CLI) • Configuring the Radio Carriers for XPIC (CLI) • Creating an XPIC Group (CLI) • Performing Antenna Alignment for XPIC (CLI) 14.5.1 XPIC Overview (CLI) Cross Polarization Interference Canceller (XPIC) is a feature that enables two radio carriers to use the same frequency with a ...

Page 359 of 825 Ceragon Proprietary and Confidential 9. Synchronization This section includes: • Configuring SyncE Regenerator • Configuring the Sync Source • Configuring the Outgoing Clock and SSM Messages • Configuring 1588 Transparent Clock 9.1 Configuring SyncE Regenerator Note: For IP-20V and IP-20E R2H ESP, SyncE Regenerator is planned for future release. In SyncE PRC pipe regenerator mode, frequency is transported between two interfaces through the radio link. With the system acting as a simple link, no distributio ...

Page 291 of 825 Ceragon Proprietary and Confidential 6.5.3 Port TX Statistics The Ethernet Port TX PM report page displays PMs that measure various peak transmission rates (per second) and average transmission rates (per second), both in bytes and in packets, for each measured time interval. The page also displays the number of seconds in the interval during which transmission rates exceeded the configured threshold. This section includes: • Displaying Ethernet Port TX PMs • Enabling or Disabling Gathering of Port TX PM Stati ...