Mitsubishi Electric MELSERVO-JET MR-JET Series Operation & User’s Manual

6.11 EMC filter (recommended) ■Surge protector (recommended) For details on surge protectors, refer to "EMC Installation Guidelines". • RSPD series (Okaya Electric Industries) [Unit: mm] • LT-CS-WS series (Soshin Electric) 41 ± 1 28.5 ± 1 28 ± 1 φ4.2 ± 0.5 5.5 ± 1 11 ± 1 +30 0 200 4.5 ± 0.5 1 3 2 Resin Lead Case 19 38 28 250 22.5 8.5 25 4 φ4.3 4 Operation status display Vinyl wire Grounding wire ...

6.9 Noise reduction techniques ■Line noise filter (FR-BSF01) This filter is effective in suppressing noise radiated from the power supply side and output side of the servo amplifier and also in suppressing high-frequency leakage current (0-phase current). It is especially effective for noise between 0.5 MHz and 5 MHz band. ■Radio noise filter (FR-BIF) This filter is effective in suppressing noise radiated from the power supply side of the servo amplifier, especially in 10 MHz and lower radio frequency bands. The FR-BIF(-H) is designed for the input o ...

3.5 Signal (device) explanation 33 3 Power supply Power supply explanations ■DICOM (Digital I/F power supply input) Input 24 V DC (24 V DC ±10 %, 300 mA) for I/O interfaces. The power supply capacity varies depending on the number of I/O interface points to be used. For sink interfaces, connect the positive terminal of the 24 V DC external power supply. For source interfaces, connect the negative terminal of the 24 V DC external power supply. ■DOCOM (Digital I/F common) DOCOM is a common terminal of input signals such as EM2 of the servo amplifier. This is separated ...

Fan unit installation procedure Insert the positioning part of the fan unit vertically, align it to the positioning part of the main unit case, and tighten with screws. Use the same screws as those used for the fan unit before replacement. ...