ABB i-bus DGN/S 1.16.1 Technical Data

DALI Gateway, Emergency Lighting, MDRC DGN/S 1.16.1, 2CDG 110 142 R0011 2CDC 071 009 S0011 Page 1 of 4 DGNS_1161_TD_EN_V1-0 2CDC 507 115 D0201 8 8 The KNX ABB i-bus® DALI Gateway with Emergency Lighting Function DGN/S 1.16.1 is a KNX modular installation device (MDRC) in Pro M- design for installation in the distribution board on 35 mm mounting rails. The DGN/S integrates operating de- vices with DALI interfaces to EN 62386 into a KNX building installation. The connection to the ABB i-bus® is implemented via a KNX connection terminal on the device shoulders. The DALI output of the DGN/S can be used to connect up to 64 DALI devices. It can also exclusively contain 64 DALI devices for self-contained emergency lighting compliant to EN 6286-202. Both “normal” lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1. Control of the lamps via KNX is under- taken by 16 lighting groups, which can be comprised of any 64 DALI lamps. An individual project-related DALI device group assignment is possible using the DALI-Software-Tool. The fault status (lamps, ballasts or emergency light converter) of every individual DALI device or of the lighting group is sent via different KNX communication objects on the KNX. In addition to the standard functions, e.g. switching, dimming and brightness value setting with the corresponding feedbacks, the DGN/S has the functions Staircase lighting, Scene, Sequence and Slave. The lighting groups can be integrated in this way into a constant lighting control. Function, duration and partial duration tests and battery tests for the emer- gency lighting systems with individual batteries to EN 62386-202 can be trig- gered and stopped via KNX. The test results are made available on the KNX. All DALI devices can be controlled together in KNX mode as well as manual mode. The DGN/S is a DALI control device (master) and requires an AC or DC auxiliary power supply. A separate DALI power supply is not required. The DALI power source for the 64 DALI devices is integrated into the DGN/S. Technical data Supply gateway operating voltage power consumption total via mains current consumption total via mains leakage loss total for device current consumption KNX power consumption via KNX 85…265 V AC, 50/60 Hz 110…240 V DC maximum 8 W at 230 V AC and max. load maximum 35 mA at 230 V AC and max. load maximum 3 W at 230 V AC and max. load maximum 10 mA maximum 210 mW DALI outputs (channels) number of outputs number of DALI devices distance between DGN/S and last DALI device cable cross-section 0.5 mm2 0.75 mm2 1.0 mm2 1.5 mm2 1 x 64 DALI device (16 lighting groups) maximum 64 to EN 62 386; DALI devices pfor self-contained emergency lighting to EN 62 386-202 are supported.2) 100 m1) 150 m1) 200 m1) 300 m1) Connections KNX DALI outputs and mains voltage tightening torque KNX connection terminal, 0.8 mm Ø, single core screw terminal 0.2…2.5 mm2 stranded 0.2…4 mm2 single core maximum 0.6 Nm

DALI Gateway, Emergency Lighting, MDRC DGN/S 1.16.1, 2CDG 110 142 R0011 Page 2 of 4 DGNS_1161_TD_EN_V1-0 2CDC 507 115 D0201 8 8 Operating and display elements button button/LED LED , green LED , yellow DALI output test for assignment of the physical address display for operation readiness for displaying DALI fault, constant light for displaying test mode, slow flashing for displaying initialisation or more than 64 DALI devices, quick flashing Enclosure IP 20 to EN 60529 Safety class II to EN 61140 Isolation category overvoltage category pollution degree III to EN 60 664-1 2 to EN 60664-1 KNX safety extra low voltage SELV 24 V DC DALI voltage typical 16 V DC (9.5…22.5 V DC) no-load voltage lowest supply current at 11.5 V highest supply current to EN 60929 and EN 62386 16 V DC 160 mA 230 mA Temperature range operation storage transport -5 °C…+45 °C -25 °C…+55 °C -25 °C…+70 °C Environmental conditions humidity maximum 93 %, moisture condensation should be excluded Design modular installation device (MDRC) dimensions mounting width mounting depth modular installation device, Pro M 90 x 72 x 64.5 mm (H x W x D) 4 modules at 18 mm 68 mm Installation on 35 mm mounting rail to EN 60 715 Mounting position as required Weight 0.16 kg Housing, colour plastic housing, grey Approvals KNX to EN 50 090-1, -2 certification CE mark in accordance with the EMC guideline and low voltage guideline 1) The length relates to the common DALI control cable. The maximum values are rounded off and relate to the resistance values. EMC influences are not considered. For this reason, the values should be considered as absolute maximum values. 2) Both “normal” lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1. However, the maximum number of DALI devices may not exceed 64.

DALI Gateway, Emergency Lighting, MDRC DGN/S 1.16.1, 2CDG 110 142 R0011 Page 3 of 4 DGNS_1161_TD_EN_V1-0 2CDC 507 115 D0201 8 8 Device type Application program Maximum number of communication objects Maximum number of group addresses Maximum number of associations DGN/S 1.16.1 Switch Dim Emergency 1f DALI/…* 246 254 255 * … = current version number of the application program. Please observe the software information on our homepage for this purpose. Note For a detailed description of the application program see “DALI Gateway Emergency Lighting DGN/S 1.16.1” product manual. It is available free-of-charge at www.abb.com/knx. The ETS and the current version of the device application program are required for programming. The current version of the application program is available for download on the internet at www.abb.com/knx. After import in the ETS, it is available in the ETS under ABB//Lighting/DALI/ Switch Dim Emergency 1f DALI. The device does not support the closing function of a KNX device in the ETS. If you inhibit access to all devices of the project with a BCU code, it has no effect on this device. Reading out data and programming is still possible. Note The DGN/S is compliant to the SELV characteristics to IEC 60 364-4-41 (VDE 0100-410). DALI does not need to feature SELV properties, and it is possible to route the DALI control lines together with the mains voltage on a multi-core cable.

DALI Gateway, Emergency Lighting, MDRC DGN/S 1.16.1, 2CDG 110 142 R0011 Page 4 of 4 DGNS_1161_TD_EN_V1-0 2CDC 507 115 D0201 8 8 Circuit diagram Dimension drawing 2CDC 072 014 F0011 1 Label carrier 2 Button (KNX) 3 LED (KNX) 4 Connection terminal (KNX) 5 LED (DALI fault) 6 LED (Gateway ON) 7 Gateway operating voltage 8 Output (DALI) 9 Button (DALI) 10 DALI device, without/with function emergency lighting with individual battery 2CDC 072 012 F0011