Acoustic Box 1800H Quick Start Manual
Text of the manual
Screw Rear Left and Rear Right
panels together using M5 screws
as shown. Push down onto
corner brackets with the Side
Panel.
Alternatively, use timber base
frame as shown.
Anchor box to timber base using
appropriate fxings.
Now insert a plastic cap into the
holes in the top of the panel to
join them. Tap into place with a
mallet.
Insert the other side panel and cap.
Slot Front Left and Front Right
panels into the Lower Brace and
Corner Brackets. Tap Corner
Caps into place with a mallet.
1
2
3
4
5
6
RUBBER
MALLET
PHILLIPS
SCREWDRIVER
002
005
007
008
014
013
010
012
006
4
1
002
012
004-2
004-1
003-2
003-1
012
004-2
004-1
Part No.
Description
Qty.
002
SIDE PANEL
2
003-1
REAR PANEL LEFT
1
003-2
REAR PANEL RIGHT
1
004-1
FRONT PANEL LEFT
1
004-2
FRONT PANEL RIGHT
1
005
REMOVABLE FRONT DOOR
2
006
TOP DOOR
1
007
CORNER BRACKET
4
008
HINGE PIN
2
010
DOOR LATCH
2
012
PLASTIC CAP
4
013
LOCK BRACKET
2
13B
LOCK SCREWS
2
014
DOOR HANDLE
4
019
TOP BRACE
1
020
BOTTOM BRACE
1
058
TOP CORNER BRACKET LH
1
059
TOP CORNER BRACKET RH
1
058
058
019
020
002
003-1
003-2
020
012
Insert Top Brace into slots in Front
Left and Front Right Panels.
Insert corner gussets into the side
and front panels by inserting into
the corner and pushing down-
wards. Remove metal dowel if
applicable to your model.
If you are in a high wind area,
The Acoustic Box suggests that
you anchor the box to a hard
surface. Use appropriate fxings
to anchor frmly.
7
9
10
11
12
8
006
010
MODEL 1800H
50/45 Powers Rd, Seven Hills, NSW 2147
T: (02) 9620 5430 E: [email protected] W: www.acousticbox.com.au
For our 3D Assembly Instructions please scan the QR code below or go to:
https://www.acousticbox.com.au/html/acoustic-box-301118/index.html
3
2
019
Attach top door to unit with hinge
pins. Align pins with holes and tap
into place with a mallet.
Connect lock brackets to the front
panel by inserting them sideways
into the slotted holes as shown.
Twist into an upright position and
screw into place.
013
13B
Insert the handles into the door untill a
“click” is heard. Place the removable
front door into the panel by placing the
lip of the door over the front panel step.
Insert the door by aligning the studs on
the side with the slots in the front panel.
Push in slightly and then down.
058
008
010
005
014
