Advantech AMAX-3245 Operation & User’s Manual

File Specifications

Brand: Advantech
Category: Engine
Model: AMAX-3245 (Operation & User’s Manual), prP49iulcrs9I
File Info: Adobe Acrobat PDF (DjVu)
File Size:
Pages: 24 pages

Download PDF

Download Advantech AMAX-3245 Manual (24 pages)

Read Online:

Read the Advantech AMAX-3245 Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

AMAX-3245 User Manual

ii Copyright The documentation and the software included with this product are copyrighted 2019 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its ...

AMAX-3245 User Manual

Chapter 1 Introduction 1.3.3 Digital Output 1.3.4 Pulse Input 1.3.5 Pulse Output Item Description Channels SVON, ERC, RST, CMP Type Single-ended, optical isolation, sink (Sink) Operating voltage Low 10Vdc High 30Vdc Max. sink current 100mA/ channel Max. output delay time 100us Protection 1,000V isolation Item Description Max. frequency 2.5MHz x1, x2, x4 (A/B phase only) Type Differential, optical isolation Input voltage L (max) 1Vdc H (min) 3.5Vdc H (max) 5Vdc Min. width for H / L pulse 200ns Item Description Max. frequency 5Mpps Type Differential, optical isolation Out ...

AMAX-3245 User Manual

Chapter 2 Hardware Wiring 2.2 Connection Terminal 2.2.1 Rotary switch (SW1-2) Two groups of rotary switches for salve module address configuration. Note: (SW1, SW2)=(F,4), Slave ID=4 x 16 + F x 1= 79 2.2.2 Power terminal (CN1) Pin Name Description SW1 X1 Range: 0-F SW2 X10 Range: 0-F Pin Name Description 1 +VEX +24V power input 2 -VEX Power ground 3 EMG Emergency stop 4 GND Earth Earth 1 2 3 4 ...

AMAX-3245 User Manual

12 3.1 Output Pulse [CW±/PULS±, CCW±/DIR±] The pulse command has two types: one is in clockwise/ counterclockwise mode; the other is in pulse/direction mode. CW+/PULS+ and CW-/PULS- are differential signal pairs, and CCW+/DIR+ and CCW-/DIR- are different signal pairs. The default setting for pulse output mode is Pulse/Direction. User can change the output mode by pro- gramming. Figure 3.1 Optocoupler Interface Figure 3.2 Linear Drive Interface ...

Advantech AMAX-3245 user guide recommended for: R 220, DX-V Series, K321, Sonesse 40 PA, 2691351-00.

⚠️ Download Safety

The Engine Operation & user’s manual (24 pages) is completely safe to download (last scan date: 25/12/2025).

Related PDF Instructions for Advantech AMAX-3245:

Engine Equipment: Frequently Requested

Have some Questions about Advantech AMAX-3245 Device?

Get valuable and actionable advices from other Advantech AMAX-3245 device users. Describe your problem or question, regarding the using of AMAX-3245, in as much detail as possible, and other users will be able to answer you.