alphatronics AT-304 Installation Manual
Text of the manual
SPECIFICATIONS ............................................................................................................................... 3
INTRODUCTION ............................................................................................................................... 3
ENROLLING TRANSMITTERS, KEYFOBS AND DETECTORS .................
AT-304 PowerCode 868Mhz (art. code. 007045)
AT-304 PG2/ PowerG 868Mhz (art. code. 007047)
Suitable for:
Visonic PowerCode 1-way 868MHz transmitters and detectors
Visonic PowerG (PG2) 2-way 868Mhz transmitters and detectors
RF MODULE
Module:
superhetrodyne RF-receiver
Frequency:
868,95MHz (broadband)
DATA PROCESSING
ID codes:
Mor
If the AT-304 is used with wireless Visonic detectors (PIR, smoke detector, gas detector, water detector or vibration
sensor), the relay output with pulse for approximately 2 seconds when the detector sends a wireless signal to the
AT -304 receiver.
If the AT-304 is used with a Visonic wireless magnetic contact, the relay output will toggle as soon as the
The AT-304 receiver is supplied in a synthetic casing and must be powered by an external 10-24VDC power supply.
The PCB contains terminal connections for one relay output, 3 open collector status outputs, an "ARM" input and
the power supply.
AT-304 PCB equipped with Visonic PowerG 868Mhz receiver module and antenna.
ENROLLING TRANSMITTERS, KEYF
