Avue AV762FTBA-2812 Instructions

The input power for AV762FTBA-2812 is DC12V/AC24V. Be sure to 2. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are service person for servicing. 3. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could by improper handling or storage. be damaged 4. Do not place the camera in the following locations: Locations where temperature is lower than -20 C or higher than 55 C; Locations where humidity is higher than 90%; 5. Clean the image sensor faceplate with care. When cleaning the panel, do not use strong or abrasive tissue or cotton tipped applicator and image sensor detergents,use a piece of lens 6. Do not attempt to aim the camera at the sun. Do not attempt to aim the camera at the sun or other extremely bright to appear irrespective of whether the objects, that cause smear camera is operating or not. This can damage the image sensor. 7. Do not put the camera in a place with interference. When this camera is installed near the equipment like wireless emits strong electromagnetic field, communication device that some irregularity such as noise on monitor screen may happen. connect it to the appropriate power,wrong connection may cause malfunction and /ordamage to the video camera. no user serviceable parts inside. Any questions please ask a qualified Thank you for your purchasing this product. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ethanol. AV762FTBA-2812 uses advanced imaging technology with resolution as high comes with a powerful OSD menu that include motion , CVBS 1280H output, , 2D/3D noise reduction. detection, digital zoom, privacy zones, lens shading compensation, DPC Auto electronic shutter, AWB, image sharpening, etc. as 1080P, support AHD/THD/CHD1080P output meanwhile self-adaptive AV762FTBA-2812 1. . High resolution,1080P, true color recovering . 5. DC12V/AC24V duplicate supply design 6.Waterproof: IP66 7. simple operation 8. OSD menu 1/2.9" CMOS 2. CVBS 1280H output, support AHD/THD/CHD1080P output meanwhile Self-adaptive 2D/3D image denoising 3 4 1. Hood 2. 3. Lens 4. Front cover 5. Camera body 6. 3-axis bracket 7. Four install screws holes (at bottom of the bracket) IR LED 1 3 6 5 7 2 4

DC 12V/AC24V( 10%) ± 3-group additional IR LEDs DC12V/650mA,AC24V/3.4W LENS EXPOSURE BACKLIGHT WHITE BAL DAY&NIGHT NR SPECIAL ADJUST SAVE&EXT MANUAL SHUTTER SENS-UP D-WDR OFF HSBLC ATW INDOOR MANUAL EXT COLOR 2DNR CAM TITLE MOTION LANGUAGE 485 DC AGC BRIGHTNESS DEFOG BLC AWC SET → OUTDOOR AWB AUTO B/W 3DNR D-EFFECT DEFECT SHARPNESS VIDEO.OUT SAVE$END LSC NOT SAVE PRIVACY RESET RS About 760g -20 ~55 ℃ ℃ O.S.D White balance Image adjustment Motion detection Privacy zones Day & night Electronic shutter Min. Illumination Power supply Operation temperature Dimension Weight SHARPNESS/MONITOR/LSC/VIDEO.OUT Built-in/Support UTC OSD Off/on(4 areas) AUTO /COLOR / B/W / EXT 1.0Vp-p composite video output, 75Ω 0 Lux(IR on) Off/on(4 areas) IR LED 1280(H) 2.8-12mm CVBS Output format Sensor 1/2.9" CMOS NR(noise reduction) D-WDR AGC Backlight Mirror function Languages Power comsumption Auto,1/25(1/30)~1/50000,X2~X30 2DNR/3DNR OFF/ON/AUTO 1~15 OFF/BLC/HSBLC OFF/MIRROR/V-FLIP/ROTATE 12 languages( ) ENG/CHN1/CHN2/GER/FRA/ ITA/SPA/POL/RUS/POR/NED/TUR Lens type ATW/AWC SET/INDOOR/ OUTDOOR/MANUAL/AWB → Defog OFF/AUTO Video output AHD2.0(1080p@25/30fps) AHD Output format THD (1080p@25/30fps) THD Output format CHD (1080p@25/30fps) CHD Output format MONITOR 100 feet IR distance 93(W)*95.5(H)*263(L)mm Under the mode of OSD logout, press left button 5 seconds to output CVBS signal, and press right button 5 seconds to output AHD signal, press up button 5 senconds to output CHD signal, and press down button 5 senconds to output THD signal 1 Using the foam pat to locate holes in the wall 2 3 Drill 4 holes in the position needed in accordance with the installation subpanel of the bracket, hole on the push the expansion bolt inside the installation hole then tighten the screws make , aim at the four Camera installation Get the wire out from the bottle of the bracket. Assembly instruction of 3D cable bracket Figure 1 Figure1:Take the screws out of the accessories pouch and use L-shape to assemble. spanner Adjustment instruction of 3D bracket Figure 2: Loosen screw 3 to rotate 360° Figure 3: Loosen screw 1 to rotate 360° Figures 4,5,6 and 7: Loosen screw 2 to rotate 90° . up,down,left,right Screw 1 L-shape spanner Screw 3 Figure 2 360 rotation ° Screw 1 Figure 3 360 rotation ° Screw 2 Figure 4 Screw 2 Figure 5 90 horizontal rotation ° Figure 6 Figure 7 90 horizontal rotation ° Screw 2 Screw 2 Screw 2 screws and fix it. AHD/THD/CHD/CVBS OUTPUT