Ayra Flash 30 LED Operation & User’s Manual

LED stroboscope User manual The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials:02-02-2017 RV Revision date and author's initials: -

bright white 5050 SMD LEDs that yield an enormous amount of light. This device is designed to generate flashing pulses of light, but can also be used statically thanks to advanced technology. We advise that you read this user manual in its entirety before unpacking the contents of the box, so that you are familiar with all of the functionality that this product has to offer. Please be sure to check that all of the parts and accessories listed below under 'Box contents' are included in the package. In the event that the Flash 30 / 60 LED does not function properly, or if you have any issues while operating it, please remove the plug from the power socket and contact your dealer for assistance. Box contents: - Ayra Flash 30 LED or Flash 60 LED stroboscope - connection cable from IEC C13 to Schuko, 1.5 mm² - connection cable from IEC C13 to UK plug, 1.5 mm² Please inspect the device and the included accessories. Should you discover that either the device or one or more of the included parts have been damaged or rendered defective while in transit, please contact your dealer directly. Please note that the pictures in this user manual serve illustrative purposes only and may differ from the actual product. The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials:02-02-2017 RV Revision date and author's initials: -

- Be qualified - Be skilled - Have read the instructions in this user manual - Be sure that neither the device nor the included accessories are damaged. Should the device or the included accessories be damaged, please contact your dealer for more information. - Ensure that the device is in good working condition and is safe to operate. Please follow the advice and instructions as they are described in this user manual. Damage caused by misuse and/or modifications made to the device are not covered by the warranty. This device does not contain any parts that can be repaired or replaced by the user. Should maintenance or repairs be necessary, they must be handled by a qualified technician. The light source of this device is not replaceable. If the light source no longer functions, the entire device needs to be replaced. Important information regarding safety and health: - Do not remove any labels or stickers from this device. - Do not leave any cables lying around. - The device should not be opened up, and any hardware or software that may be present should not be modified. - To achieve optimal performance, inputs on this device should not be fed with a signal higher than necessary. - The device should only be used indoors; contact with water, rain and moisture should always be avoided. Do not place any objects containing liquid on top of the device. - Remove the device from any nearby flames or heat sources; do not place it near flammable fluids, gasses or objects. - Disconnect this device from a power source if it will not be used for a longer period of time, if maintenance The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials:02-02-2017 RV Revision date and author's initials: - WARNING! Keep this device away from moisture, water and rain to avoid the chance of electric shocks. WARNING! Only connect this device to a suitable power socket. This device functions on a specific power voltage. If it is plugged into a power socket with a different voltage, it could result in permanent damage and even dangerous situations such as fire or electric shocks. WARNING! Be careful when operating this device. Touching the wires that are connected to the mains, inside or outside the device, could result in electric shocks.

- Do not pull on the cable to remove a connector, as it can cause damage. - Do not use any cables other than the ones described in this manual. Do not use defective cables. Please contact your dealer if the included or necessary cables do not function properly with this device. - Only use this device with a stable AC power supply. - Only use this device with power form a grounded power source. - In the event that the device is exposed to extreme temperature changes (e.g. transported through a cold outside environment into a warm indoor environment), it should not be turned on until it has reached room temperature. This is necessary to prevent moisture from forming in the device, which could lead to electric shocks. Guidelines and operation of this device: - This device is intended for use by professionals on stage, in theatres, in clubs, and in similar entertainment locations. - This device is not suitable for use by children, and should always be operated by an adult. - This device is designed to create light effects for entertainment purposes. It is not suitable for household illumination. - This device may only be used in a suitable environment where no damage to the device can occur. Do not use the device in moist or dusty environments such as: - indoor swimming pools where chlorine is used - beaches where there is sand and salt - outdoors - indoors in spaces where intense heat sources are present, or where it reaches temperature levels that would be considered uncomfortable for a person - Avoid impact and collisions during use and transport. Do not transport the device while it is in use. Avoid using excessive force when installing and operating the device. - The user should become familiar with the functions of this device before using it. - Should the device not be used in the manner described in this user manual, damages or even injuries could occur. Ayra cannot be held responsible for any injuries or damages that occur as a result of improper use of this product. Storage and transport: - This product was designed for mobile use. Please only transport the device in the original packaging, or in a flight case with a suitable foam inlay. - This device was not designed for permanent (24/7) use. The expected lifespan of the device will not be affected by occasionally turning the device off. Disconnect the device or turn off the power when it is not actively in use. - If the device will not be used for a longer period of time, it should be disconnected and stored in a dust-free environment. - Do not expose the device to extreme temperature differences. Housing - Inspect the device's housing frequently, and always just before use. Avoid operating the device if there are large dents or cracks, or if screws are missing. Do not use the device if the housing is not in good condition. Contact your dealer or a qualified technician if you are unsure about the state of the device. - Check the device and the screws for corrosion. Corrosion must not be present on this device. Contact your dealer or a qualified technician if you find any corrosion on the screws. Every power and signal connector should be securely mounted. Do not use the device if the connectors are not secure. - Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the power supply and wiping it down with a dry or slightly moist cloth. If the device is used frequently, the cleaning intervals should increase. The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials:02-02-2017 RV Revision date and author's initials: -

(Waste Electrical and Electronic Equipment) directive. The requirements of this directive apply to all manufacturers and producers of electronic devices in the EU. Do not throw this product away with regular rubbish. Please contact your local authority for more information about how to recycle and dispose of these products in your region. By recycling this product in the proper manner, we can work together to ensure that we can continue to enjoy these kinds of products and still protect the environment as much as possible from pollution. CE: The CE logo indicates that this product meets the European norms and requirements to which it must legally conform. Only suitable for indoor use: this product was only designed for indoor use. The maximum environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit). Contact: Ayra professional lighting products Verrijn Stuartweg 18 4462 GE Goes The Netherlands Please do not send any products to this correspondence address. Should you wish to send in a product for repairs or for a refund, please contact your dealer for an RMA request (Return Merchandise Authorisation). The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials:02-02-2017 RV Revision date and author's initials: -