Boyo VTK501HD Operation & User’s Manual

1. BILL OF MATERIAL 2. SPECIFICATIONS 1/3” HD Color CMOS Image Sensor (1058) 976 (H) x 592 (V) Resolution 700 TV Lines 0.1 LUX Minimum Illumination 170 Degree Viewing Angle (D) 6 VDC ~ 32 VDC Power Source IP68 Waterproof Rating Selectable Reverse or Non-Rerverse Image Selectable On/Off Fixed Parking Guidelines Ball Mount Camera with 6ft (1.8m) Camera Cable Metal Square Bracket Mount Metal Flush Mount Metal Angle Mount Rubber Angle Mount Concealed License Plate Mount 24ft (7.2m) RCA Video Cable with trigger wire 0.984” (25mm) Hole Saw for Flush Mount 3M Brand Mounting Tape for Mounts HD CAMERA VIDEO/POWER CABLE 24ft RCA VIDEO CABLE SQUARE BRACKET MOUNT FLUSH MOUNT METAL ANGLE MOUNT RUBBER ANGLE MOUNT LICENSE PLATE MOUNT 3M MOUNTING TAPE MOUNTING HARDWARE HOLE SAW FOR FLUSH MOUNT CAMERA ADJUST TOOLS 1

4. METAL FLUSH MOUNT ASSEMBLY 6. RUBBER ANGLE MOUNT ASSEMBLY USER’S MANUAL MODEL: VTK501HD 5 IN 1 CAMERA SYSTEM 7. LICENSE PLATE MOUNT ASSEMBLY CAMERA CAMERA CAMERA CAMERA LICENSE PLATE MOUNT RUBBER ANGLE MOUNT METAL ANGLE MOUNT SQUARE MOUNT 5. METAL ANGLE MOUNT ASSEMBLY METAL SQUARE MOUNT METAL FLUSH MOUNT *NOTE: INSTALL THE CAMERA FROM THE FRONT HOLE OF THE RUBBER ANGLE MOUNT. USE THE CAMERA ADJUST TOOL TO SET THE CAMERA TO THE DESIRED POSITION. *NOTE: THE CAMERA CABLE CAN EXIT THE METAL ANGLE MOUNT FROM THE TOP HOLE OR FROM THE BACK OF THE MOUNT. *NOTE: THE LICENSE PLATE MOUNT HAS TWO POSITIONS TO INSTALL THE CAMERA SQUARE MOUNT TO ALLOW CLEARANCE FOR A LICENSE PLATE FRAME OR ALLOW MORE ANGLE ADJUSTMENT. *NOTE: TO PREVENT WATER LEAK, APPLY A SMALL BEAD OF CLEAR SILICONE SEALENT AROUND THE FLUSH MOUNT BEFORE INSTALLING IT INTO THE PRE-DRILLED 25mm HOLE SMALL O RING LARGE O RING

A) RED WIRE CONNECTS TO (+) POWER SOURCE (Example - Reverse Light Wire + when in reverse gear, Ignition On Switch +) B) BLACK/RED WIRE CONNECTS TO CHASSIS GROUND (NOT the other wire at reverse light) C) YELLOW RCA VIDEO CABLE CONNECTOR PLUGS INTO CAMERA CABLE YELLOW RCA CONNECTOR AT THE CAMERA SIDE D) (OPTIONAL) 4” RED WIRE ON YELLOW RCA CABLE CONNECTS TO REVERSE LIGHT WIRE + (CAMERA SIDE) E) (OPTIONAL) 4” RED WIRE ON YELLOW RCA CABLE CONNECTS TO REVERSE TRIGGER INPUT (MONITOR SIDE) F) YELLOW RCA VIDEO CABLE CONNECTOR PLUGS INTO CAMERA INPUT AT THE MONITOR SIDE USER’S MANUAL MODEL: VTK501HD 5 IN 1 CAMERA SYSTEM 9. WIRE LOOPS (BLUE AND WHITE) A) BLUE LOOP CUT = NO PARKING GUIDELINES B) BLUE LOOP NOT CUT = PARKING GUIDELINES C) WHITE LOOP CUT = NON-REVERSE IMAGE D) WHITE LOOP NOT CUT = REVERSE IMAGE D & E A & B C & F For Technical Support, Call 888-941-3060 or Email [email protected] 3 RED WIRE (+ )REVERSE LIGHT WIRE OR (+) IGNITION SWITCH BLACK/RED WIRE (-) VEHICLE CHASSIS GROUND CONNECT THE RCA EXTENSION CABLE TO CAMERA RCA/POWER CABLE (OPTIONAL CONNECTION) RCA EXTENSION CABLE RED WIRES RED WIRE ON CAMERA SIDE *CONNECT TO (+) REVERSE LIGHT WIRE RED WIRE ON MONITOR/RADIO SIDE *CONNECTS TO REVERSE INPUT WIRE OF MONITOR OR RADIO *FOR REVERSE CAMERA INSTALLATION CAMERA VIDEO OUT CAMERA POWER WIRES