BZB Gear BG-ND-20XHSRP Operation & User’s Manual

zoom, focus, sound and screen size. Additionally, run and delete preset positions and perform other operations. 4.2.4 Configuration Click Configuration access the following settings. Menu Explanation Audio configure Including audio compressing format,sampling frequency,sampling precision,compressing code rate settings etc. Video configure Including video encoding,video parameters,character-overlapping,character size,video output setting etc. Network c ...

Click on the bubble for “Use the following IP address” In the IP address field enter a non-conflicting IP address on the same subnet as the camera. If there is another device with the same IP address you will not be able to connect. In the example below we are using 192.168.5.200 In the Subnet mask field enter 255.255.255.0 In the Default gateway field type 192.168.5.1 You can leave the DNS fields blank. Click OK to apply your settings. NOTE: When you are finished configuring the camera you will need to return to this screen and click ...

the “【SET PRESET】” key first and then press the number key 0- 9 to record a preset. Note: 10 preset positions in total are available by remote controller. 2. Preset Running: Press a number key 0-9 to run a preset. 3. Preset Clearing: To clear a preset position, the user can press the “【CLEAR PRESET】” key first and then press the number key 0-9 to clear the preset. Note: press the “【#】” key three times to erase all presets. 7) Camera Remote Controller Address Setting 【*】+【＃】+【F1】:Camera ...

Camera WindowsDB-9 1.DTR 1.DCD 2.DSR 2.RXD 3.TXD 3.TXD 4.GND 4.DTR 5.RXD 5.GND 6.GND 6.DSR 7.IR OUT 7.RTS 8.NC 8.CTS 9.RI 2) RS-232 Mini-DIN 8-pin Port Definition 3) RS232 (DB9) Port Definition NO. Port Definition 1 DTR Data Terminal Ready 2 DSR Data Set Ready 3 TXD Transmit Data 4 GND System Ground 5 RXD Receive Data 6 GND System Ground 7 IR OUT IR Commander Signal 8 NC No Connection NO. Port Definition 1 DCD Data Carrier Detect 2 RXD Receive Data 3 TXD Transmit Data 4 DTR Data Terminal Ready 5 GND System Ground 6 DSR Data Set Ready 7 RTS R ...

y0 50 02 FF On y0 50 03 FF Off(Standby) CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_FocusAFModeInq 8x 09 04 38 FF y0 50 02 FF Auto Focus y0 50 03 FF Manual Focus y0 50 04 FF One Push Mode CAM_FocusPosInq 8x 09 04 48 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position CAM_WBModeInq 8x 09 04 35 FF y0 50 00 FF Auto y0 50 01 FF 3000K y0 50 02 FF 4000K y0 50 03 FF One Push Mode y0 50 04 FF 5000K y0 50 05 FF Manual y0 50 00 FF 6500K 6500K CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF ...

2.2.1 Camera Performance This camera offers superior performance and rich interfaces. Featuring NDI technology for Local Area Network broadcasting along with advanced ISP processing algorithms to provide vivid images with a strong sense of depth, high resolution and accurate color rendition. It supports H.265/H.264 encoding which makes motion video fluent and clear even with less than ideal bandwidth conditions. 1.Superb High-definition Image: It employs a 1/2.8 inch high quality CMOS sensor. Resolution is up to 1920x1080 with frame rate up to 60 fps. 2.Variable Optical Zoo ...

Color Style: Default, style1~4. Color Temp: high/middle/low 3) IMAGE Highlight (IMAGE) in the Menu and click the【HOME】key to enter Image Settings. Brightness: 0~14 Contrast: 0~14 Sharpness: 0~15 Flip-H: On/Off Flip-V: On/Off B&W Mode: color, black/white Gamma: default, 0.47, 0.50, 0.52, 0.55 DZoom: digital zoom options: On/Off DCI: Dynamic Contrast: Off,1～8 4) FOCUS Highlight (FOCUS) in the Menu and click the【HOME】key to enter Focus Settings. Focus Mode: Auto, manual AF-Zone: Up, middle, down AF-Sensitivity: High, middle, ...