CARLO GAVAZZI VariFlex3 RVLF Series Manual 

Type Variflex3 RVFF Specifications are subjected to change without notice. 145 Notes: △H1: Frequency augmentation setting in acceleration, t1: Terminal conduction time in acceleration △H2: Frequency augmentation setting in deceleration, t2: Terminal conduction time in deceleration △H3: Output frequency augmentation in acceleration, t3: Acceleration time in output △H4: Output frequency augme ...

Type Variflex3 RVFF Specifications are subjected to change without notice. 181 07-27: Start Selection after fault during SLV mode 07-27=0: Speed search start: Speed search is executed after a fault in SLV mode. 07-27=1: Normal start: Speed search is not enabled. Note: Set the parameter to 1 (normal start) after a fault has occurred and a mechanical brake is used to stop the motor. 07-28: Start afte ...

Type Variflex3 RVFF Specifications are subjected to change without notice. 187 Figure 4.4.60 Stall prevention selection in operation 08-05 Selection for Motor Overload Protection (OL1) Range 【xxx0b】：Motor Overload Protection is disabled. 【xxx1b】：Motor Overload Protection is enabled. 【xx0xb】：Cold Start of Motor Overload 【xx1xb】：Hot Start of Motor Overload 【x0xxb】：Standa ...

Type Variflex3 RVFF Specifications are subjected to change without notice. 419 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_3M = 250 MaxTsdr_6M = 450 MaxTsdr_12M = 800 Redundancy = 0 ;Not Redundancy Supported Repeater_Ctrl_Sig = 2 ;TTL 24V_Pins = 0 ;Not Connected ; Implementation_Type = "VPC3" Bitmap_Device = "DP_NORM" Bitmap_Diag ...