Comrex VH2 Quick Start Manual
Text of the manual
Put Comrex On The Line.
Toll Free in USA: 800-237-1776 • www.comrex.com
e-mail: [email protected]
19 Pine Road, Devens, MA 01434 USA
Tel: +1-978-784-1776 • Fax: +1-978-784-1717
VH2 Quickstart Guide
The VH2 is a studio telephone interface device designed to work on VoIP telephone systems. This guide will
give you the minimum you need to know to get the syst
Here’s a list of the steps that need to be accomplished to start using VH2. We’ll outline each in detail below:
1 Using the Comrex Device Manager utility, set static IP info into the VH2.
2 If using the companion telephone set, enter the VH2 static IP info into the telephone set.
3 Using a computer browser, set up the provider details (cloud pro
There are two ways to set the static IP information using Device Manager. The “rescue” mode allows you to
change parameters during the first five minutes of operation, and is initiated using the “Network Settings”
button on the right pane. This mode is most useful if you’ve forgotten the unit password. The normal mode of
changing any settings in VH
Step 2 - Companion phone
If you have the VVX201 IP phone for use with VH2, you’ll need to set it up to be an extension of the VH2. The
phone needs to be on the same physical LAN as the VH2, but it doesn’t need a static IP address. You’ll only
need to program the static address of the VH2 into the phone.
There are two common ways to connect the VH2 and
Once the phone is on your LAN, it will get a DHCP address from the network. You can find what this is by
pressing the menu button(home icon) on the phone and navigating to the following using the direction cursor
and enter key:
Settings->4)Status->2)Network->1)TCP/IP Parameters
Open a browser on your local computer and input into the URL bar https://
