Chord VGW1 Operation & User’s Manual

Item ref: 171.848UK User Manual Version 1.2 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty ...

Introduction: Thank you for choosing the Chord VHF-series wireless system. This professional wireless set provides an instrument VHF radio system for freedom of movement without loss of audio quality. Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get the best performance from your purchase. Contents: Please take care when unpacking this product. Inspect for any damage and en ...

Beltpack Transmitter Receiver Rear Panel Receiver Front Panel Operation To begin, insert batteries into the transmitter. Slide the front half of the beltpack upwards just enough to reveal the battery compartment and position the supplied 9V battery inside (ensure + and - are the correct way around) and then slide the beltpack case together as before. Position the receiver within the best available line of sight to the transmitter(s) and co ...

Specifications Power supply (receiver) 12 - 18Vdc 350mA adaptor (supplied) Batteries (transmitters) 4 x AA (2 per transmitter - included) Carrier frequency 863.8MHz + 864.8MHz RF power 10mW S/N ratio >80dB THD <0.5% @ 1kHz Audio frequency response 50Hz - 18kHz Range 60m (max) Output impedance 2.2kΩ Output level 400mv (balanced), 200mv (unbalanced) Connectors DC in, 2 x XLRM, 6.3mm jack, 2 x BNC antenna Dimensions - handheld transmitter 24 ...