Cisco Headset 560 Series Quick Reference Manual

Quick Reference Guide Headset LED status indication Incoming Call Blinking red Active Call Steady red Headset paired with dock White LED blinking every 4 seconds Headset and dock not paired White LED blinking rapidly High Sound Pressure—Avoid listening to high volume levels for long periods to prevent possible hearing damage. When you plug in your headset, lower the volume of the headset speaker before you put the headset on. If you remember to lower the volume before you take the headset off, the volume will start lower when you plug in your headset again. Be aware of your surroundings. When you use your headset, it may block out important external sounds, particularly in emergencies or in noisy environments. Don’t use the headset while driving. Don’t leave your headset or headset cables in an area where people or pets can trip over them. Always supervise children who are near your headset or headset cables. Call Indication Incoming call Blinking green Active call Steady green Muted call Steady red Power/Call Mute Volume +/- Base LED status indication Battery strength LEDs show solid as battery charges System updating LEDs blink in sequence from left to right Headset and dock not paired All LEDs blinking

Quick Reference Guide Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) Turn on/off your headset Hold for 4 seconds. You will hear a tone indicating headset status. Make a call Press . Put a call on hold Press . End a call Hold until you hear a tone. Reject a call Press twice. Adjust your volume Press . Mute yourself on a call Press . Unmute yourself on a call Press again. For more information, visit: http://www.cisco.com/go/headsets Copyright. © 2018 Cisco Systems, Inc. All rights reserved. June 2019 End a call and answer an incoming call 1. Hold until you hear a tone. 2. Press . End a call and resume a held call 1. Hold until you hear a tone. 2. Select the call you would like to resume. 3. Press . Put a call on hold and answer an incoming call Press . Put a call on hold and resume a call 1. Press . 2. Optional: Select the call you would like to resume. 3. Press again.