CHIEF PSB-2060 Installation Instructions
Text of the manual
I N S T A L LA T I O N I N S T R U C T IO N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8804-000357 Rev01
2007 Chief Manufacturing
www.chiefmfg.com
12/07
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS (79.38 KG).
PSB-2060
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Side Interface Bracket
(2) Top/Bottom Bracket
(4) Mounting Buttons-10-24 Tapped
(8) 10-24 Button Head Cap Screws
(4) M8 x 35 mm Phillips Head Screw
(1) 1/8” Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1.
Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets
(four places) (see Figure 2 & Figure 3).
CAUTION!
Figure 1
WARNING!
Figure 2
Figure 3
Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &
Figure 5).
3.
Attach the mounting brackets to the display using M8 x 35mm screws (see Figure 6 & Figure 7). Be
sure not to over tighten screws, because doing so can damage the display.
4.
With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5.
Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4
Figure 5
Figure 6
Figure 7
