Datalogic 94ACC0164 Instructions

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. Rhino is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. www.datalogic.com 94ACC0164 UPS Battery Backup with Speaker General Features The UPS Battery Backup with Speaker is a cable cover with an integrated battery pack and a speaker. In case of a power loss the VMC can be powered via the backup battery. Please note that the UPS Battery Backup with Speaker is not compatible with 94ACC0175 Quick Change V-Mount. The pack contains the following components • 1 x UPS Battery Backup with Speaker • 4 x M3x10 phillips head • 1 x UPS electronics • 1x power supply metal plate 12/24/48 VDC, UPS • 1 x cable 404040.100 • 1 x cable 404041.100 • 1 x cable 403040.000 • 1 x cable 403041.000 • 4 x cable passage type 1 • 3 x cable passage type 2 • 5 x cable passage type 3 • 3 x screw M2.5x6, pozidriv • 6 x cable ties Assembling cable passage on the VMC There are 3 types of cable passages which must be assembled before the cable cover can be installed. Depending on the cable diameter choose the best fitting cable passage type 1 or type 2. Cut the cable passage on the thin side (circle marked). Insert the cable with the mounted cable passage in the VMC housing (the wide side of the passage must be on top). Use closed cable passage for unused cable slots. Type 1: e.g. USB Cable Type 2: e.g. power cord Type 3: no cable

Connect the speaker to the audio port Connect the backup battery to the port over the power supply connection Put the UPS Battery Backup with Speaker in the groove of the VMC Push the UPS Battery Backup with Speaker down Fix the UPS Battery Backup with Speaker with 4 screws and fasten them with 1 Nm