eKey Uno Quick Start Manual

• Rechargeable battery • Torx screwdriver • Charger • Bottom cap • Safety screw • Screws for attaching the ekey uno to the mounting plate • Anchors and screws for attaching the mounting plate to the wall Battery-operated variant Observe the enclosed Safety Information. Scope of delivery Mounting plate Sensor Light ring Activation sensor Cover Rechargeable battery

vicinity of your door lock – height 110 cm) 2 Charge the battery Battery is charging Battery fully charged 4 Remove the cover *NOTICE: Remove the entire base foil. Thoroughly clean the surface where the device is to be mounted. Adhere the mounting plate only to a smooth, dry surface at room temperature. Apply a large amount of pressure to the surface to adhere the mounting plate. The bond only reaches maximum adhesive strength after 3 days. Only then can the mounting plate be fully loaded. For further information, visit: www.ekey-uno.net/faq. 1 Activate the eqiva BLUETOOTH® Smart Lock Follow the instructions in the operating instructions for the eqiva BLUETOOTH® Smart Lock Glue variant* CLICK An adhesive foil is already attached to the mounting plate. Remove the base foil and adhere the mounting plate. OR Screw variant

close clamp Optional: Attach the safety screw Battery-operated variant 8 Replace the cover 5 Screw the ekey uno in place 6 Remove the bottom cap

FREE DOWNLOAD Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Play, and the Google Play logo are trademarks of Google Inc. 9 Download the app ekey uno app GET CONNECTED! www.ekey-uno.net BLUETOOTH® Smart Lock

2019-05-13 Copyright © 2019 ekey biometric systems GmbH. All content, artwork, and any ideas contained in this Quick Start Guide are subject to applicable copyright laws. Any transmission, relinquishment, or transfer of this content or parts thereof to any third party requires the prior written consent of ekey biometric systems GmbH. Translation of the original Quick Start Guide. www.ekey-uno.net | This document is not subject to updating. We reserve the right to make technical modifications and change the product‘s appearance; any liability for errors and misprints is excluded. Critical battery level Access denied due to time slot More information is available in the FAQ area of the ekey uno app www.ekey-uno.net Operating the ekey uno Close Open Place finger on sensor. No connection to eqiva BLUETOOTH® Smart Lock Connect ekey uno with mobile device Place finger on sensor, wait until LEDs flash blue. Place finger on sensor again while LEDs are flashing. Place finger on sensor until top right segment flashes.

• Torx screwdriver • Charger • Bottom cap • Safety screw • Screws for attaching the ekey uno to the mounting plate • Anchors and screws for attaching the mounting plate to the wall Mains-powered variant Bottom cap Scope of delivery Observe the enclosed Safety Information. Sensor Light ring Activation sensor Cover Mounting plate

1 Activate the eqiva BLUETOOTH® Smart Lock Follow the instructions in the operating instructions for the eqiva BLUETOOTH® Smart Lock 2 Cable through mounting plate 3 Attach the mounting plate (mount the ekey uno in the direct vicinity of your door lock – height 110 cm) *NOTICE: Remove the entire base foil. Thoroughly clean the surface where the device is to be mounted. Adhere the mounting plate only to a smooth, dry surface at room temperature. Apply a large amount of pressure to the surface to adhere the mounting plate. The bond only reaches maximum adhesive strength after 3 days. Only then can the mounting plate be fully loaded. For further information, visit: www.ekey-uno.net/faq. Glue variant* An adhesive foil is already attached to the mounting plate. Remove the base foil and adhere the mounting plate. OR Screw variant

5 Remove the bottom cap 7 Screw the ekey uno in place 8 Replace bottom cap and cover Optional: Attach the safety screw

ekey uno app FREE DOWNLOAD Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Play, and the Google Play logo are trademarks of Google Inc. 9 Download the app ekey uno app GET CONNECTED! www.ekey-uno.net

2019-05-13 Operating the ekey uno Copyright © 2019 ekey biometric systems GmbH. All content, artwork, and any ideas contained in this Quick Start Guide are subject to applicable copyright laws. Any transmission, relinquishment, or transfer of this content or parts thereof to any third party requires the prior written consent of ekey biometric systems GmbH. Translation of the original Quick Start Guide. www.ekey-uno.net | This document is not subject to updating. We reserve the right to make technical modifications and change the product‘s appearance; any liability for errors and misprints is excluded. Critical battery level Access denied due to time slot More information is available in the FAQ area of the ekey uno app www.ekey-uno.net Place finger on sensor, wait until LEDs flash blue. Place finger on sensor again while LEDs are flashing. Close Open Place finger on sensor. No connection to eqiva BLUETOOTH® Smart Lock Connect ekey uno with mobile device Place finger on sensor until top right segment flashes.