Nokia BH-219 Get Started

DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-219 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. © 2010 Nokia. All ...

5 your Nokia dealer. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction With the Nokia Bluetooth Headset BH-219, you can make and answer calls hands-free with your compatible mobile device. ...

Get started The headset contains the following parts shown on the title page: multifunction key (1), Near Field Communication (NFC) area (2), charger connector (3), microphone (4), earloop (5), earpiece (6), and indicator light (7). Before using the headset, you must charge the battery and pair the headset with a comp ...

7 The fully charged battery has power for up to 6 hours of talk time or up to 100 hours of standby time. To check the battery charge when the headset is not connected to a charger, press the multifunction key when the headset is connected to a mobile device. If the indicator light is green, the charge level is sufficient. ...

If the headset is not connected to a device within about 30 minutes, it switches off automatically. Pair and connect the headset Before using the headset, you must pair and connect it to a compatible device. You can pair the headset with up to eight devices, but you can connect it to a maximum of two devices at a time. ...

9 4. Select the headset from the list of found devices. 5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to at least one device and is ready for use, the blue indicator light ...

and push the new earpad into place (9). Place the headset on the ear To use the headset with the earloop, attach the earloop to it (11). To detach the earloop, gently pull it from the headset. You can rotate the earpad to keep the headset securely in the ear (10). For example, if you use the headset on the right ear, ...