Digitus EASY WEASEL Quick Installation Manual
Text of the manual
EASY WEASELTM MOBILITY
3G | 4G | LTE ACCESSPOINT & TRAVEL ROUTER
Quick Installation Guide
IMPORTANT USAGE INSTRUCTION
For the convenience of use, this product accepts power from a desktop or a laptop
computer. It’s mandatory to connect both of two USB connectors at one end of USB
supplied power cable to computer at one time. Power supply is not sufficient for the device
to operate normally if only one USB connector is inserted into the computer. In this scenario
it might cause temporary malfunction on the computer.
LED indicators
LED color
Description
USB LED
Blue
3G/3.5G is on
Blue in flash
Data access
Wi-Fi LED
Blue
WLAN is on
Blue in flash
Data access
Blue in fast flash
Device is in WPS mode
DO NOT switch on WiFi Mobile Router before performing the installation steps below.
Step 1.
Turn off the power switch and then plug USB 3G Modem to the Router.
Note: The WiFi Mobile Router is designed to work with either UMTS or EV-DO and
even HSUPA 3G modem. Please refer to your service provider for detailed
feature information.
Step 2.
Plug your USB modem which is with activated USB dongle.
Step 3.
You can choose either Power Adapter or USB Cable for power supply.
3.1. Use Power Adapter
Connect with the power adapter to the receptor on the back panel of it.
3.2. Use USB cable
Connect USB Cable to the same place of it.
Step 4.
4.1. Use Power Adapter
Then plug the other end of the power adapter into a wall outlet.
4.2. Use USB Cable
Then plug the other end of USB Cable to USB port on your PC or NB.
Step 5.
Turn on the power switch.
The Wi-Fi and 3G LEDs will turn ON to indicate that the power has been
applied.
Getting Started with Easy Setup Utility
We provide Wizard and Easy Setup by Windows Utility to enable you to set up the WiFi Mobile Router quickly
and easily.
Check the steps below before running the section.
(1) Press WPS button more than 6 seconds on the Router. The Router will reset to default.
(2) Connect to the Router by Wi-Fi. The default SSID is the same as “Mac Address”
(3) Insert CD to CD-ROM, Click the Easy Setup Utility from CD or Auto Run.
Step 1.
You can start to configure the device
via the Easy Setup Utility
Step 2.
Select language then click “Next”
to continue.
1. Please select Wizard mode to
run the setup step-by-step to
diagnose the network settings
of the Router.
2. Click the “Wizard” button and
click “NEXT” to continue.
Step 4.
1. Make sure your USB 3G Modem
is connected to the USB port of
the Router.
2. Make sure the Router is
powered on.
3. Make sure your computer has
connected to the Router.
4. Make sure your computer has
an IP address.
5. Click “Next” to continue.
Step 5.
1. Key in the SSID, Channel and
Security options, for example:
SSID: “WiFi Mobile Router”,
Security: WEP
Key: “1234567890”.
Default SSID is the same as “Mac
Address”
2. And then click “Next” to
continue.
Select “Auto-Detection”, and the
Utility will try to detect and configure
the required 3G service settings
automatically.
Click “Next” to continue.
Default PIN Code is empty, if you
have PIN Code, you must enter it.
For example “0000”. If no, just Click
“Next” to continue.
Step 6-2.
Or you can select “Manual” and
manually fill in the required 3G
service settings provided by
your ISP.
Click “Next” to continue.
Step 7.
Check the settings, and then click
the “Next” if the settings are correct.
