EasyIO FW Series Firmware Upgrade Manual

7 Step 6 At the dashboard screen, click expand icon, at the bottom left to view the sidebar. Then select Utility menu, . Step 7 Once you are in the utility page, select Firmware Upgrade option. Step 8 Locate the firmware file in your computer and reference to it. FW series firware file extension is *.tar.gz or *tar.zz. ...

2 Document Change Log 12th August 2017 Document created. 17th Dec 2018 Updated disclaimer and support channel emails addresses 23rd May 2019 Update to include FW-28 ...

2 Document Change Log 12th August 2017 Document created. 17th Dec 2018 Updated disclaimer and support channel emails addresses 23rd May 2019 Update to include FW-28 ...

2 Document Change Log 12th August 2017 Document created. 17th Dec 2018 Updated disclaimer and support channel emails addresses 23rd May 2019 Update to include FW-28 ...

9 The firmware upgrade procedure will take approximately 10 to 12 minutes. Wi-Fi connection will be disconnect during this period. Do not attempt to connect to the controller during this period. **DO NOT LOSE POWER TO THE CONTROLLER DURING THIS PERIOD.** It is important to wait and allow the flashing/reboot process to complete. Wait for the RED LED (ERR) to turn off for before powering off or perform any connection. Failure to follow this precautionary instruction may damage the controller requiring it to be returned back to factory for repairs or rep ...

8 Step 9 Click Flash Firmware button after firmware file is selected. The FW series controller will start file uploading process. The file upload speed depends to the network speed connection. Tech Tip: -**during firmware flashing, no power interruption is allowed. Any power interruption will damage the controller and if this occurs the controller cannot be recovered and controller is required to shipped back to EasyIO for recovery process. Ensure the controller is supplied with a constant 24Vac or 24Vdc supply during the flashing procedure** Step 10 O ...