Factor Electronics HD150BaseT-Balun TX: Transmitter Balun Instructions Manual

Audio Return feature. When the TV supports ARC, set the switch to right side to select TV audio return. If the TV does not support ARC, set the switch to left side to select Optical audio input to return audio from the RX balun to the TX balun. ARC Position Switches TV and AVR supports ARC When the ARC feature is used, the selection switch for audio return should be set to ARC on the Transmitter and Receiver. The TV’s audio will be sent to the AVR ...

3 2 1 0 EDID type Combination of DIP positions 0 0 0 0 HDMI1080p@60Hz, Audio 2CH PCM 0 0 0 1 HDMI1080p@60Hz, Audio 5.1CH PCM/DTS/DOLBY 0 0 1 0 HDMI1080p@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD 0 0 1 1 HDMI1080i@60Hz, Audio 2CH PCM 0 1 0 0 HDMI1080i@60Hz, Audio 5.1CH PCM/DTS/DOLBY 0 1 0 1 HDMI 1080i@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD 0 1 1 0 HDMI 4K@60Hz 4:2:0, Audio 2CH PCM 0 1 1 1 HDMI 4K@60Hz 4:2:0, Audio 5.1CH PCM/DTS/DOLBY 1 0 0 0 HDMI 4K@60Hz 4:2:0, Audio 7.1CH PCM/DTS/DOLBY/HD 1 0 0 1 HDMI 4K@60Hz 4 ...

Set the switch to NON-ARC on the Transmitter, and Optical on the Receiver. The audio from Optical In on the receiver will be sent to the L/R Audio and Optical Out on the transmitter. ET0102-GD3/ET0101-GD4A Position of Audio Return selection switch Transmitter NON-ARC Receiver Optical Application Diagram Specifications TX Transmitter RX Reciever Video Input Connectors: 1x HDMI Type A, 19-pin female 1x HDBaseT RJ45 connector Video output Connectors: 1x HDMI Type A, 19-pin female 1x HDBaseT RJ45 connector 1x HD ...

Channel from ET0101-GD4A at ARC mode. Or audio breakout from HDMI input at Local mode.. ② Optical Out -- TOSLINK audio out. Connects to local a AVR when using Audio Return Channel (ARC) feature. Or extract the audio from the HDMI input using Local mode. ③ Local/ARC switch selection -- Switch to left/right side to select Local mode/ ARC mode. When using ARC feature, the switch should be set to ARC mode. ④ HDMI in ...

years from the date of shipment. During the warranty period, Factor Electronics will, at its option, repair or replace products that prove to be defective. Repairs are warranted for the remainder of the original warranty or a 90 day extended warranty, whichever is longer. For equipment under warranty, the owner is responsible for freight to Factor Electronics and all related customs, taxes, tariffs, insurance, etc. Factor Electron ...

please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. SAFTY AND NOTICE 1) Th ...

please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment. SAFTY AND NOTICE 1) Th ...

statutory, including those of merchantability and fitness for a particular purpose. The buyer shall pass on to any purchaser, lessee, or other user of Factor Electronics products, the aforementioned warranty, and shall indemnify and hold harmless Factor Electronics from any claims or liability of such purchaser, lessee, or user based upon allegations that the buyer, its agents, or employees have made additional warranties o ...